International Journal of Heat and Mass Transfer
-
Publication Venue For
- Heat tubes: Conduction and convection. 137:1258-1262. 2019
- Counter cross-flow evaporator geometries for supercritical organic Rankine cycles. 135:425-435. 2019
- Evolutionary design of conducting layers with fins and freedom. 126:926-934. 2018
- Comment on “Study on the consistency between field synergy principle and entransy dissipation extremum principle”. 120:1187-1188. 2018
- Novel evaporator architecture with entrance-length crossflow-paths for supercritical Organic Rankine Cycles. 119:208-222. 2018
- The evolutionary design of cooling a plate with one stream. 116:9-15. 2018
- Entrance-length dendritic plate heat exchangers. 114:1350-1356. 2017
- Thermal analysis in a triple-layered skin structure with embedded vasculature, tumor, and gold nanoshells. 111:677-695. 2017
- Arrays of flow channels with heat transfer embedded in conducting walls. 99:504-511. 2016
- Constructal design for convection melting of a phase change body. 99:762-769. 2016
- Counterflow heat exchanger with core and plenums at both ends. 99:622-629. 2016
- Professor Arcot R. Balakrishnan on his 65th birthday. 94:498-499. 2016
- Constructal design of gas-cooled electric power generators, self-pumping and atmospheric circulation. 91:647-655. 2015
- The robustness of the permeability of constructal tree-shaped fissures. 90:259-265. 2015
- Constructal design of latent thermal energy storage with vertical spiral heaters. 81:283-288. 2015
- Heatlines (1983) versus synergy (1998). 81:654-658. 2015
- Thermal coupling between a helical pipe and a conducting volume. 83:762-767. 2015
- Vascularization for cooling and reduced thermal stresses. 80:858-864. 2015
- Power from a hot gas stream with superheater and reheater in parallel. 73:29-32. 2014
- Assemblies of heat pumps served by a single underground heat exchanger. 75:327-336. 2014
- Constructal design of thermoelectric power packages. 79:291-299. 2014
- Double tree structure in a conducting body. 77:140-146. 2014
- Phase change heat storage in an enclosure with vertical pipe in the center. 72:329-335. 2014
- Thermal coupling between a spiral pipe and a conducting volume. 77:202-207. 2014
- Power from a hot gas stream with multiple superheaters and reheaters. 67:153-158. 2013
- Constructal design of a comb-like channel network for self-healing and self-cooling. 66:898-905. 2013
- One underground heat exchanger for multiple heat pumps. 65:727-738. 2013
- Study of the one dimensional and transient bioheat transfer equation: multi-layer solution development and applications.. 62:153-162. 2013
- Effect of size on ground-coupled heat pump performance. 64:115-121. 2013
- Underground heat flow patterns for dense neighborhoods with heat pumps. 62:632-637. 2013
- Vapor chambers with jumping-drop liquid return from superhydrophobic condensers. 61:409-418. 2013
- Professor Bud Peterson on his 60th birthday. 58:3-5. 2013
- Constructal flow orientation in conjugate cooling channels with internal heat generation. 57:241-249. 2013
- Trees and serpentines in a conducting body. 56:488-494. 2013
- Constructal design of underground heat sources or sinks for the annual cycle. 55:7832-7837. 2012
- Why we want power: Economics is physics. 55:4929-4935. 2012
- Freely morphing tree structures in a conducting body. 55:4744-4753. 2012
- The physics of spreading ideas. 55:802-807. 2012
- Constructal design of distributed energy systems: Solar power and water desalination. 55:2213-2218. 2012
- Professor Amir Faghri on his 60th birthday. 54:4459-4461. 2011
- Vascularization for cooling and mechanical strength. 54:2774-2781. 2011
- The effect of size on efficiency: Power plants and vascular designs. 54:1475-1481. 2011
- Constructal multi-tube configuration for natural and forced convection in cross-flow. 53:5121-5128. 2010
- Fluid flow and heat transfer in vascularized cooling plates. 53:3607-3614. 2010
- The "flow of stresses" concept: The analogy between mechanical strength and heat convection. 53:2963-2968. 2010
- Constructal multi-scale pin-fins. 53:2773-2779. 2010
- Constructal architecture for heating a stream by convection. 53:2248-2255. 2010
- Constructal solar chimney configuration. 53:327-333. 2010
- The transient response of vascular composites cooled with grids and radial channels. 52:4175-4183. 2009
- Tree-shaped vascular wall designs for localized intense cooling. 52:4535-4544. 2009
- Vascularization with line-to-line trees in counterflow heat exchange. 52:4327-4342. 2009
- Constructal ducts with wrinkled entrances. 52:3628-3633. 2009
- Constructal steam generator architecture. 52:2362-2369. 2009
- Vascular structures with flow uniformity and small resistance. 52:1761-1768. 2009
- Vascular materials cooled with grids and radial channels. 52:1230-1239. 2009
- Dendritic vascularization for countering intense heating from the side. 51:5877-5886. 2008
- A mathematical model for skin burn injury induced by radiation heating. 51:5497-5510. 2008
- Vascularization with trees matched canopy to canopy: Diagonal channels with multiple sizes. 51:2029-2040. 2008
- Vascularized materials with heating from one side and coolant forced from the other side. 50:3498-3506. 2007
- Optimal temperature distribution in a 3D triple-layered skin structure embedded with artery and vein vasculature and induced by electromagnetic radiation. 50:1843-1854. 2007
- Thermodynamic optimization of tree-shaped flow geometries with constant channel wall temperature. 49:4839-4849. 2006
- Constructal tree-shaped parallel flow heat exchangers. 49:4558-4566. 2006
- Tree-shaped flow structures with local junction losses. 49:2957-2964. 2006
- Conduction tree networks with loops for cooling a heat generating volume. 49:2626-2635. 2006
- Constructal theory of droplet impact geometry. 49:2412-2419. 2006
- Exergetic analysis of fuel cell micropowerplants fed by methanol. 49:2397-2411. 2006
- Self-learning finite elements for inverse estimation of thermal constitutive models. 49:2466-2478. 2006
- Constructal theory of global circulation and climate. 49:1857-1875. 2006
- Thermodynamic optimization of tree-shaped flow geometries. 49:1619-1630. 2006
- Constructal PEM fuel cell stack design. 48:4410-4427. 2005
- Constructal multi-scale cylinders with natural convection. 48:4300-4306. 2005
- Constructal multi-scale structures with asymmetric heat sources of finite thickness. 48:2662-2672. 2005
- Distribution of heat sources in vertical open channels with natural convection. 48:1462-1469. 2005
- Constructal multi-scale cylinders in cross-flow. 48:1373-1383. 2005
- Tree-shaped networks with loops. 48:573-583. 2005
- Constructal flow structure for a PEM fuel cell. 47:4177-4193. 2004
- Disc cooled with high-conductivity inserts that extend inward from the perimeter. 47:4257-4263. 2004
- Combined 'heat flow and strength' optimization of geometry: Mechanical structures most resistant to thermal attack. 47:3477-3489. 2004
- Designed porous media: Maximal heat transfer density at decreasing length scales. 47:3073-3083. 2004
- The constructal law and the thermodynamics of flow systems with configuration. 47:3203-3214. 2004
- Inverted fins: Geometric optimization of the intrusion into a conducting wall. 47:2577-2586. 2004
- Dendritic fins optimization for a coaxial two-stream heat exchanger. 47:111-124. 2004
- Optimal distribution of discrete heat sources on a plate with laminar forced convection. 47:2139-2148. 2004
- Optimal distribution of discrete heat sources on a wall with natural convection. 47:203-214. 2004
- Optimally staggered finned circular and elliptic tubes in forced convection. 47:1347-1359. 2004
- Constructal tree-shaped two-phase flow for cooling a surface. 46:2785-2797. 2003
- Constructal comment on a Fermat-type principle for heat flow. 46:1885-1886. 2003
- Dendritic heat convection on a disc. 46:4381-4391. 2003
- Fitting the duct to the "body" of the convective flow. 46:1693-1701. 2003
- Optimal tree-shaped networks for fluid flow in a disc-shaped body. 45:4911-4924. 2002
- Dendritic constructal heat exchanger with small-scale crossflows and larger-scales counterflows. 45:4607-4620. 2002
- Combined 'flow and strength' geometric optimization: Internal structure in a vertical insulating wall with air cavities and prescribed strength. 45:3313-3320. 2002
- Tree-shaped flow structures designed by minimizing path lengths. 45:3299-3312. 2002
- Constructal design for cooling a disc-shaped area by conduction. 45:1643-1652. 2002
- Development of tree-shaped flows by adding new users to existing networks of hot water pipes. 45:723-733. 2001
- Constructal optimization of nonuniformly distributed tree-shaped flow structures for conduction. 44:4185-4194. 2001
- Integrative thermodynamic optimization of the environmental control system of an aircraft. 44:3907-3917. 2001
- Optimization study and heat transfer comparison of straggered circular and elliptic tubes in forced convection. 44:3953-3961. 2001
- Tree-shaped insulated designs for the uniform distribution of hot water over an area. 44:3111-3123. 2001
- The tree of convective heat streams: Its thermal insulation function and the predicted 3/4-power relation between body heat loss and body size. 44:699-704. 2001
- Convective trees of fluid channels for volumetric cooling. 43:3105-3118. 2000
- Multicellular natural convection in a high aspect ratio cavity: experimental and numerical results. 43:3157-3170. 2000
- Constructal T-shaped fins. 43:2101-2115. 2000
- Cylindrical trees of pin fins. 43:4285-4297. 2000
- Power extraction from a hot stream in the presence of phase change. 43:191-201. 2000
- Power extraction from a hot stream in the presence of phase change. 43:191-201. 1999
- Conduction trees with spacings at the tips. 42:3739-3756. 1999
- Constructal trees of circular fins for conductive and convective heat transfer. 42:3585-3597. 1999
- Effects of anisotropy and boundary plates on the critical values of a porous medium heated from below. 42:3419-3430. 1999
- Constructal theory of natural crack pattern formation for fastest cooling. 41:1945-1954. 1998
- Maximum power from a hot stream. 41:2025-2035. 1998
- Constructal-theory network of conducting paths for cooling a heat generating volume. 40:799-811. 1997
- Control of Rayleigh-Bénard convection in a small aspect ratio container. 40:817-822. 1997
- Optimal geometric arrangement of staggered plates in forced convection. 40:1795-1805. 1997
- Theory of organization in nature: Pulsating physiological processes. 40:2097-2104. 1997
- A comparison of the reduced Galerkin and pseudo-spectral methods for simulation of steady Rayleigh-Bénard convection. 39:2401-2407. 1996
- Analogy between electrical machines and heat transfer-irreversible heat engines. 39:3659-3666. 1996
- Heat sinks with sloped plate fins in natural and forced convection. 39:1773-1783. 1996
- Maximum power from fluid flow. 39:1175-1181. 1996
- The optimal spacing of cylinders in free-stream cross-flow forced convection. 39:311-317. 1996
- Thermodynamic optimization of cooling techniques for electronic packages. 39:1213-1221. 1996
- Forced convection from a surface covered with flexible fibers. 38:767-777. 1995
- Free stream cooling of a stack of parallel plates. 38:519-531. 1995
- Fundamentals of ice making by convection cooling followed by contact melting. 38:2833-2841. 1995
- Optimal allocation of a heat-exchanger inventory in heat driven refrigerators. 38:2997-3004. 1995
- Optimization of pulsating heaters in forced convection. 38:2925-2934. 1995
- The optimal spacing between horizontal cylinders in a fixed volume cooled by natural convection. 38:2047-2055. 1995
- Theory of heat transfer-irreversible power plants-II. The optimal allocation of heat exchange equipment. 38:433-444. 1995
- Natural convection in porous media with anisotropic dispersive thermal conductivity. 37:1081-1094. 1994
- Plate fins with variable thickness and height for air-cooled electronic modules. 37:433-445. 1994
- Plate fins with variable thickness and height for air-cooled electronic modules. 37:433-445. 1994
- The optimal spacing of a stack of plates cooled by turbulent forced convection. 37:1045-1048. 1994
- When to defrost a refrigerator, and when to remove the scale from the heat exchanger of a power plant. 37:523-532. 1994
- Comments on "Analysis of close-contact melting for octadecane and ice inside isothermally heated horizontal rectangular capsule". 36:832. 1993
- Contact melting during sliding on ice. 36:1171-1179. 1993
- Heatline visualization of forced convection laminar boundary layers. 36:3957-3966. 1993
- How to distribute a finite amount of insulation on a wall with nonuniform temperature. 36:49-56. 1993
- Melting around a shaft rotating in a phase-change material. 36:2499-2509. 1993
- The optimal cooling of a stack of heat generating boards with fixed pressure drop, flowrate or pumping power. 36:3677-3686. 1993
- The resonance of natural convection in an enclosure heated periodically from the side. 36:2027-2038. 1993
- Comments on "Coupled heat and mass transfer by natural convection from vertical surfaces in porous media". 35:3498. 1992
- Removal of contaminant generated by a discrete source in a slot ventilated enclosure. 35:1169-1180. 1992
- The optimal spacing of parallel plates cooled by forced convection. 35:3259-3264. 1992
- The optimal thickness of a wall with convection on one side. 35:1673-1679. 1992
- Efficiency of transient contaminant removal from a slot ventilated enclosure. 34:2603-2615. 1991
- Film condensation on an upward facing plate with free edges. 34:578-582. 1991
- Thermodynamics of an 'isothermal' flow: the two-dimensional turbulent jet. 34:407-413. 1991
- Optimum hair strand diameter for minimum free-convection heat transfer from a surface covered with hair. 33:206-209. 1990
- Solidification in the presence of high Rayleigh number convection in an enclosure cooled from the side. 33:661-671. 1990
- Melting in an enclosure heated at constant rate. 32:1063-1076. 1989
- The contact heating and lubricating flow of a body of glass. 32:751-760. 1989
- The problem of time-dependent natural convection melting with conduction in the solid. 32:2447-2457. 1989
- Theory of heat transfer-irreversible refrigeration plants. 32:1631-1639. 1989
- Ernst Schmidt's approach to fin optimization: an extension to fins with variable conductivity and the design of ducts for fluid flow. 31:1635-1644. 1988
- Scaling theory of melting with natural convection in an enclosure. 31:1221-1235. 1988
- The process of melting by rolling contact. 31:2273-2283. 1988
- Theory of heat transfer-irreversible power plants. 31:1211-1219. 1988
- Mass and heat transfer by high Rayleigh number convection in a porous medium heated from below. 30:2341-2356. 1987
- The horizontal spreading of thermal and chemical deposits in a porous medium. 30:2289-2303. 1987
- Mass and heat transfer by natural convection in a vertical slot filled with porous medium. 29:403-415. 1986
- Heat and mass transfer by natural convection in a porous medium. 28:909-918. 1985
- Natural convection with combined heat and mass transfer buoyancy effects in a porous medium. 28:1597-1611. 1985
- Natural convection in a porous layer heated and cooled along one vertical side. 27:1879-1891. 1984
- Natural convection near 4°C in a water saturated porous layer heated from below. 27:2355-2364. 1984
- Penetrative convection in porous medium bounded by a horizontal wall with hot and cold spots. 27:1749-1757. 1984
- The nondarcy regime for vertical boundary layer natural convection in a porous medium. 27:717-722. 1984
- Exergy conservation in parallel thermal insulation systems. 26:335-340. 1983
- Mechanism for transition to turbulence in buoyant plume flow. 26:1515-1532. 1983
- Natural convection heat transfer in a porous layer with internal flow obstructions. 26:815-822. 1983
- Natural convection in a partially divided enclosure. 26:1867-1878. 1983
- Natural convection in vertically and horizontally layered porous media heated from the side. 26:1805-1814. 1983
- The boundary layer regime in a porous layer with uniform heat flux from the side. 26:1339-1346. 1983
- A uniform thermal field in a hyperthermia chamber for microvascular studies. 25:1313-1320. 1982
- Optimum flowrate history for cooldown and energy storage processes. 25:1087-1092. 1982
- Heat transfer across a vertical impermeable partition imbedded in porous medium. 24:1237-1245. 1981
- Heat transfer through single and double vertical walls in natural convection: Theory and experiment. 24:1611-1620. 1981
- Reply to "comments on 'a synthesis of analytical results for natural convection heat transfer across rectangular enclosures'". 24:1557-1558. 1981
- A synthesis of analytical results for natural convection heat transfer across rectangular enclosures. 23:723-726. 1980
- Experimental study of natural convection in a horizontal cylinder with different end temperatures. 23:1117-1126. 1980
- Natural convection in a vertical cylindrical well filled with porous medium. 23:726-729. 1980
- A general variational principle for thermal insulation system design. 22:219-228. 1979
- Natural convection in horizontal space bounded by two concentric cylinders with different end temperatures. 22:919-927. 1979
- Fully developed natural counterflow in a long horizontal pipe with different end temperatures. 21:701-708. 1978
- Fully developed natural counterflow in a long horizontal pipe with different end temperatures.. 21:701708. 1978
- General criterion for rating heat-exchanger performance. 21:655-658. 1978
- The effect of stable stratification on the motion in a rotating spherical annulus. 21:1251-1259. 1978
- Thermal convection in rotating spherical annuli-1. Forced convection. 21:1543-1553. 1978
- Thermal convection in rotating spherical annuli-2. Stratified flows. 21:1555-1564. 1978