Journal of Sound and Vibration

• 

  Publication Venue For

  • Potential well hopping and performance of ocean energy harvesters.  465. 2020
  • Nonlinear dynamics of a non-contact translational-to-rotational magnetic transmission.  459. 2019
  • Optimizing logarithmic decrement damping estimation through uncertainty propagation.  457:368-376. 2019
  • Investigating threshold escape behavior for the gimballed horizontal pendulum system.  450:47-60. 2019
  • Experiments on the thermal post-buckling of panels, including localized heating.  439:300-309. 2019
  • Design and experimental study of a Nonlinear Energy Sink coupled to an electromagnetic energy harvester.  437:340-357. 2018
  • Dynamics of unforced and vertically forced rocking elliptical and semi-elliptical disks.  417:341-358. 2018
  • On modal cross-coupling in the asymptotic modal limit.  416:172-191. 2018
  • Snap-through twinkling energy generation through frequency up-conversion.  399:216-227. 2017
  • Normal form analysis of a forced aeroelastic plate.  390:141-163. 2017
  • Equilibria and vibration of a buckled beam with attached masses or spring–mass systems.  379:166-176. 2016
  • High frequency analysis of a plate carrying a concentrated nonlinear spring–mass system.  379:84-105. 2016
  • Exact solution of free vibration of a uniform tensioned beam combined with both lateral and rotational linear sub-systems.  341:206-221. 2015
  • Proper orthogonal decomposition method for analysis of nonlinear panel flutter with thermal effects in supersonic flow.  337:263-283. 2015
  • Quenching chatter instability in turning process with a vibro-impact nonlinear energy sink.  355:392-406. 2015
  • Post-buckling longterm dynamics of a forced nonlinear beam: A perturbation approach.  333:2617-2631. 2014
  • A driven system of impacting pendulums: Experiments and simulations.  333:1734-1753. 2014
  • Minimizing error in the logarithmic decrement method through uncertainty propagation.  333:2804-2811. 2014
  • Post-buckling longterm dynamics of a forced nonlinear beam: A perturbation approach 2014
  • Projection-free proper orthogonal decomposition method for a cantilever plate in supersonic flow.  333:6190-6208. 2014
  • Characterizing dynamic transitions associated with snap-through of clamped shallow arches.  332:5837-5855. 2013
  • Optimization of an acoustic rectifier for uni-directional wave propagation in periodic mass-spring lattices.  332:4876-4894. 2013
  • Dynamics of a horizontal pendulum driven by high-frequency rocking.  332:6505-6518. 2013
  • Pendulum models of ponytail motion during walking and running.  332:3768-3780. 2013
  • The nonholonomic and chaotic nature of a rolling isolation system.  332:3535-3551. 2013
  • On the use of weighting matrices to improve harmonic balance parameter identification results.  332:2941-2953. 2013
  • A numerical investigation of snap-through in a shallow arch-like model.  332:2532-2548. 2013
  • A driven system of impacting pendulums: Experiments and simulations 2013
  • The effect on bending waves by defects in pinned elastic plates.  331:5087-5106. 2012
  • On the comparison of semi-analytical methods for the stability analysis of delay differential equations.  331:4057-4071. 2012
  • Harmonic balance analysis of the bistable piezoelectric inertial generator.  331:3617-3627. 2012
  • Linear and nonlinear electromagnetic coupling models in vibration-based energy harvesting.  331:922-937. 2012
  • Investigations of a nonlinear energy harvester with a bistable potential well.  329:1215-1226. 2010
  • On the performance and resonant frequency of electromagnetic induction energy harvesters.  329:1348-1361. 2010
  • Fuzzy stability analysis of regenerative chatter in milling.  329:1025-1041. 2010
  • Analysis of milling dynamics for simultaneously engaged cutting teeth.  329:585-606. 2010
  • Energy criterion for potential well escapes in a bistable magnetic pendulum.  323:864-876. 2009
  • An energy-balance approach for oscillator parameter identification.  321:65-78. 2009
  • An optimal stochastic control theory for distributed energy harvesting networks.  320:707-725. 2009
  • Energy harvesting from the nonlinear oscillations of magnetic levitation.  319:515-530. 2009
  • Analytical prediction of chatter stability for variable pitch and variable helix milling tools.  317:664-686. 2008
  • Vibration isolation using extreme geometric nonlinearity.  315:721-731. 2008
  • Free vibration of a cantilevered beam with multiple steps: Comparison of several theoretical methods with experiment.  312:713-725. 2008
  • Measurement nonlinearity interpreted as material behavior in dynamic nanoindentation.  311:1358-1370. 2008
  • Large deflections and vibration of a tapered cantilever pulled at its tip by a cable.  310:433-441. 2008
  • Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar.  310:409-420. 2008
  • Vibration isolation using buckled or pre-bent columns-Part 2: Three-dimensional motions of horizontal rigid plate.  310:421-432. 2008
  • Nonlinear model and system identification of a capacitive dual-backplate MEMS microphone.  309:276-292. 2008
  • Performance and reliability of semi-active equipment isolation.  306:74-90. 2007
  • Experimental and theoretical study of gust response for a wing-store model with freeplay.  295:659-684. 2006
  • Closed form solutions for the dynamic response of Euler-Bernoulli beams with step changes in cross section.  295:214-225. 2006
  • Real-time implementation of adaptive feedback and feedforward generalized predictive control algorithm.  294:82-96. 2006
  • Equilibria and vibration of a heavy pinched loop.  288:81-90. 2005
  • Analysis of buckled and pre-bent fixed-end columns used as vibration isolators.  283:1216-1228. 2005
  • A multivariate, attractor-based approach to structural health monitoring.  283:295-310. 2005
  • The recursive generalized predictive feedback control: Theory and experiments.  279:171-199. 2005
  • Dynamic analysis of modal shifting and mode jumping in thermally buckled plates.  278:233-256. 2004
  • Limit cycles, bifurcations, and accuracy of the milling process.  277:31-48. 2004
  • Asymptotic modal analysis of dynamical systems: The effect of modal cross-correlation.  276:65-80. 2004
  • An assessment of modal property effectiveness in detecting bolted joint degradation: Theory and experiment.  275:1113-1126. 2004
  • Study of airfoil gust response alleviation using an electro-magnetic dry friction damper. Part 1: Theory.  269:853-874. 2004
  • Study of airfoil gust response alleviation using an electro-magnetic dry friction damper. Part 2: Experiment.  269:875-897. 2004
  • Structural vibration suppression via active/passive techniques [4].  262:739-751. 2003
  • Multiple chatter frequencies in milling processes.  262:333-345. 2003
  • Vibration isolation using buckled struts [3].  260:965-973. 2003
  • Use of frequency data to predict secondary bifurcation.  251:919-926. 2002
  • Active control of sound transmission through a curved panel into a cylindrical enclosure.  249:325-349. 2002
  • A crude method of loop-shaping adaptive structures through optimum spatial compensator design.  247:489-508. 2001
  • Damping estimates from experimental non-linear time-series.  246:815-827. 2001
  • Measured free vibrations of partially clamped, square plates.  231:1311-1320. 2000
  • Tradeoffs in design complexity - Temporal versus spatial compensation.  228:1182-1194. 1999
  • AUTHOR'S REPLY.  225:798-800. 1999
  • COMMENTS ON “THE HIGH-FREQUENCY RESPONSE OF A PLATE CARRYING A CONCENTRATED MASS/SPRING SYSTEM”.  225:783-798. 1999
  • Responses of near-optimal, continuous horizontally curved beams to transit loads.  222:565-578. 1999
  • Comments on the natural frequencies of rectangular plates derived from the rayleigh-ritz method.  217:579-584. 1998
  • Hybrid control: Separation in design.  214:784-791. 1998
  • Stability estimation of high dimensional vibrating systems under state delay feedback control.  214:497-511. 1998
  • The high-frequency response of a plate carrying a concentrated mass/spring system.  213:843-863. 1998
  • Investigations of low frequency stick-slip motion: Experiments and numerical modelling.  213:577-600. 1998
  • Impact response and the influence of friction.  211:801-818. 1998
  • Characterizing the dynamic response of a thermally loaded, acoustically excited plate.  196:635-658. 1996
  • Phase compensation for feedback control of enclosed sound fields.  195:701-718. 1996
  • Comment on energy flow predictions in a structure of rigidly joined beams using receptance theory.  194:445-447. 1996
  • Natural frequency considerations of an impact oscillator.  194:452-460. 1996
  • Periodic solutions of an unsymmetric oscillator including a comprehensive study of their stability characteristics.  192:959-976. 1996
  • Transient motion and overturning of a rocking block on a seesawing foundation.  191:177-187. 1996
  • Moving away from collocated control.  190:129-136. 1996
  • CURVE AND SURFACE VEERING FOR A BRACED COLUMN.  187:879-885. 1995
  • Routes to escape from an energy well.  187:133-144. 1995
  • Measuring the stability of periodic attractors using perturbation-induced transients: Applications to two non-linear oscillators.  172:85-102. 1994
  • Experimental study of asymptotic modal analysis applied to a rectangular plate with concentrated masses.  170:671-681. 1994
  • On the Behavior of Characteristic Multipliers Through a Period-Doubling Sequence.  169:699-703. 1994
  • Effect Of Axial Load On Forced Vibrations Of Beams.  168:395-405. 1993
  • Comparison of theory and experiment for non-linear flutter and stall response of a helicopter blade.  165:251-276. 1993
  • An experimental study of an impacting pendulum.  164:364-374. 1993
  • Experimental mimicry of Duffing's equation.  158:447-467. 1992
  • Author's reply.  152:373-374. 1992
  • Some comments on the 1988 Rayleigh medal lecture. (JSV 133(1), 1-27).  144:355-356. 1991
  • A chaotic scenario.  144:179-180. 1991
  • The high-frequency response of a plate carrying a concentrated mass.  138:321-333. 1990
  • Dynamic stability of a completely free plate subjected to a controlled non-conservative follower force.  132:115-128. 1989
  • Effects of the Poisson ratio and negative thrust on the dynamic stability of a free plate subjected to a follower force.  129:255-269. 1989
  • On the harmonic response of an oscillator with unsymmetric restoring force.  126:157-165. 1988
  • Frequency domain solutions to multi-degree-of-freedom, dry friction damped systems.  124:207-224. 1988
  • On necessary and sufficient conditions for chaos to occur in Duffing's equation: an Heuristic approach.  121:195-200. 1988
  • An examination of initial condition maps for the sinusoidally excited buckled beam modeled by the Duffing's equation.  117:219-232. 1987
  • Localization of vibrations by structural irregularity.  114:549-564. 1987
  • Parametric studies of the dynamic evolution through a fold.  110:99-109. 1986
  • Damping in beams and plates due to slipping at the support boundaries, part 2: Numerical and experimental study.  108:509-522. 1986
  • Experimental investigation of asymptotic modal analysis for a rectangular plate.  106:203-216. 1986
  • Damping in beams and plates due to slipping at the support boundaries.  105:243-253. 1986
  • The behavior of a linear, damped modal system with a non-linear spring-mass-dry friction damper system attached, part II.  101:55-74. 1985
  • Natural frequencies of twisted rotating plates.  97:429-449. 1984
  • On the cracked Bell.  96:485-493. 1984
  • Vibrations of twisted cantilevered plates-Summary of previous and current studies.  96:159-173. 1984
  • Comments on "Free vibration of beams with abrupt changes in cross-section".  93:157-158. 1984
  • Forced response of a cantilever beam with a dry friction damper attached, part I: Theory.  91:255-267. 1983
  • Forced response of a cantilever beam with a dry friction damper attached, part II: Experiment.  91:269-291. 1983
  • The behavior of a linear, damped modal system with a non-linear spring-mass-dry friction damper system attached.  89:65-84. 1983
  • Flutter of a buckled plate as an example of chaotic motion of a deterministic autonomous system.  85:333-344. 1982
  • Component mode analysis of a simple non-linear, non-conservative system.  80:233-246. 1982
  • Non-linear oscillator models in bluff body aero-elasticity.  75:251-264. 1981
  • Vibration and buckling of rectangular plates under in-plane hydrostatic loading.  70:543-555. 1980
  • Comments on non-linear flexural vibrations of a cylindrical shell.  60:596-597. 1978
  • Comments on "On collapse and flutter phenomena in thin tubes conveying fluid" by D.S. Weaver and M.P. Paidoussis.  55:312-314. 1977
  • Acoustoelasticity: General theory, acoustic natural modes and forced response to sinusoidal excitation, including comparisons with experiment.  52:519-542. 1977
  • An experimental-theoretical correlation study of non-linear bending and torsion deformations of a cantilever beam.  50:533-544. 1977
  • On the aeroelastic instability of two-dimensional panels in uniform incompressible flow.  47:163-178. 1976
  • The effect of stimulus intensity upon the localization of sound sources on the median plane.  38:498-500. 1975
  • Dynamic analysis of an elastic plate on a thin, elastic foundation.  35:343-360. 1974
  • Improvements to a small free-field listening room.  35:139-142. 1974
  • Comments on "Vibrations of point supported plates".  32:524. 1974
  • Noise or flutter or both?.  11:159-180. 1970
  • Aerodynamic forces on an oscillating cylindrical duct with an internal flow.  6:71-85. 1967
  • Response of plates to fluid loading.  6:164-165. 1967
  • Scattering by cavities of arbitrary shape in an infinite plate and associated vibration problems 2011