Porosity

• 

  Subject Areas on Research

  • 3D printing of high-strength, porous, elastomeric structures to promote tissue integration of implants. 
  • A Hierarchical Nanoparticle-in-Micropore Architecture for Enhanced Mechanosensitivity and Stretchability in Mechanochromic Electronic Skins. 
  • Accelerated wound healing by injectable microporous gel scaffolds assembled from annealed building blocks 
  • Achieving high permeability and enhanced selectivity for Angstrom-scale separations using artificial water channel membranes. 
  • Activating an adaptive immune response from a hydrogel scaffold imparts regenerative wound healing. 
  • Application of magnetic resonance microscopy to tissue engineering: a polylactide model. 
  • Authors' reply to Letter to the Editor regarding: Impaction durability of porous PEEK and titanium-coated PEEK interbody fusion devices. 
  • Available space and extracellular transport of macromolecules: effects of pore size and connectedness. 
  • Biomanufacturing organized collagen-based microfibers as a Tissue ENgineered Device (TEND) for tendon regeneration. 
  • Biomechanical strain as a trigger for pore formation in Schlemm's canal endothelial cells. 
  • Ca(2+)/calmodulin regulates Kvβ1.1-mediated inactivation of voltage-gated K(+) channels. 
  • Capillary electrophoresis coupled with electrochemiluminescence detection using porous etched joint. 
  • Cation-Inhibited Transport of Graphene Oxide Nanomaterials in Saturated Porous Media: The Hofmeister Effects. 
  • Characterization of porous, dexamethasone-releasing polyurethane coatings for glucose sensors. 
  • Chemical sintering generates uniform porous hyaluronic acid hydrogels 
  • Click by Click Microporous Annealed Particle (MAP) Scaffolds. 
  • Comparison of a hydroxyapatite-coated sleeve and a porous-coated sleeve with a modular revision hip stem. A prospective, randomized study. 
  • Complex microparticle architectures from stimuli-responsive intrinsically disordered proteins. 
  • Compressive anisotropy of sheet and strut based porous Ti-6Al-4V scaffolds. 
  • Computational Framework to Evaluate the Hydrodynamics of Cell Scaffold Geometries. 
  • Computer-assisted design of an implantable, intrathoracic artificial lung. 
  • Concentration-dependent behavior of nisin interaction with supported bilayer lipid membrane. 
  • Concurrent aggregation and deposition of TiO2 nanoparticles in a sandy porous media. 
  • Controlled release of ethacrynic acid from poly(lactide-co-glycolide) films for glaucoma treatment. 
  • Controlling Particle Fraction in Microporous Annealed Particle Scaffolds for 3D Cell Culture. 
  • Culture of primary rat hepatocytes within porous chitosan scaffolds. 
  • Deformation and fatigue of tough 3D printed elastomer scaffolds processed by fused deposition modeling and continuous liquid interface production. 
  • Deposition of silver nanoparticles in geochemically heterogeneous porous media: predicting affinity from surface composition analysis. 
  • Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering. 
  • Design and characterization of microporous hyaluronic acid hydrogels for in vitro gene transfer to mMSCs 
  • Design and characterization of poly(ethylene glycol) photopolymerizable semi-interpenetrating networks for chondrogenesis of human mesenchymal stem cells. 
  • Do Surface Porosity and Pore Size Influence Mechanical Properties and Cellular Response to PEEK? 
  • Does Increased Coefficient of Friction of Highly Porous Metal Increase Initial Stability at the Acetabular Interface? 
  • Effect of Chemical and Physical Properties on the In Vitro Degradation of 3D Printed High Resolution Poly(propylene fumarate) Scaffolds. 
  • Effect of scaffold microarchitecture on osteogenic differentiation of human mesenchymal stem cells. 
  • Effects of 3D printed surface topography and normal force on implant expulsion. 
  • Effects of Surface Topography and Chemistry on Polyether-Ether-Ketone (PEEK) and Titanium Osseointegration. 
  • Electrical energy required to form large conducting pores. 
  • Electrospun cartilage-derived matrix scaffolds for cartilage tissue engineering. 
  • Endothelialization of microporous YIGSR/PEG-modified polyurethaneurea. 
  • Engineered skeletal muscle tissue networks with controllable architecture. 
  • Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering. 
  • Fibrotic Changes to Schlemm's Canal Endothelial Cells in Glaucoma. 
  • Functional repair of critically sized femoral defects treated with bioinspired titanium gyroid-sheet scaffolds. 
  • Groundwater Chemistry Has a Greater Influence on the Mobility of Nanoparticles Used for Remediation than the Chemical Heterogeneity of Aquifer Media. 
  • Heterogeneities in fullerene nanoparticle aggregates affecting reactivity, bioactivity, and transport. 
  • High-Strength Hydrogel Attachment through Nanofibrous Reinforcement. 
  • High-strength, porous additively manufactured implants with optimized mechanical osseointegration. 
  • Impact of surface porosity and topography on the mechanical behavior of high strength biomedical polymers. 
  • Impaction durability of porous polyether-ether-ketone (PEEK) and titanium-coated PEEK interbody fusion devices. 
  • In vitro and in vivo characterization of porous poly-L-lactic acid coatings for subcutaneously implanted glucose sensors. 
  • Injectable tissue integrating networks from recombinant polypeptides with tunable order. 
  • Injection of Hydrogel Biomaterial Scaffolds to The Brain After Stroke. 
  • Interaction of K7Fe3+P2W17O62H2 with supported bilayer lipid membranes on platinum electrode. 
  • Intravital microscopy evaluation of angiogenesis and its effects on glucose sensor performance. 
  • Investigation of neovascularization in three-dimensional porous scaffolds in vivo by a combination of multiscale photoacoustic microscopy and optical coherence tomography. 
  • Laboratory assessment of the mobility of nanomaterials in porous media. 
  • Local deformation behavior of surface porous polyether-ether-ketone. 
  • Macroporous Dual-compartment Hydrogels for Minimally Invasive Transplantation of Primary Human Hepatocytes. 
  • Magnetoactive sponges for dynamic control of microfluidic flow patterns in microphysiological systems. 
  • Measuring Nanoparticle Attachment Efficiency in Complex Systems. 
  • Melittin-induced bilayer leakage depends on lipid material properties: evidence for toroidal pores. 
  • Microporous annealed particle hydrogel stiffness, void space size, and adhesion properties impact cell proliferation, cell spreading, and gene transfer. 
  • Mobility of Four Common Mercury Species in Model and Natural Unsaturated Soils. 
  • Modeling electroporation in a single cell. 
  • Nitric oxide-releasing silica nanoparticle-doped polyurethane electrospun fibers. 
  • Non-viral DNA delivery from porous hyaluronic acid hydrogels in mice 
  • Nucleic Acid Delivery from Granular Hydrogels. 
  • Optoacoustic imaging identifies ovarian cancer using a microenvironment targeted theranostic wormhole mesoporous silica nanoparticle. 
  • Outcomes of Surgical Reconstruction Using Custom 3D-Printed Porous Titanium Implants for Critical-Sized Bone Defects of the Foot and Ankle. 
  • Pannexin 1, an ATP release channel, is activated by caspase cleavage of its pore-associated C-terminal autoinhibitory region. 
  • Pathways Governing Polyethylenimine Polyplex Transfection in Microporous Annealed Particle Scaffolds. 
  • Piezo proteins are pore-forming subunits of mechanically activated channels. 
  • Poly(propylene fumarate)-based materials: Synthesis, functionalization, properties, device fabrication and biomedical applications. 
  • Polyethylene liner exchange of the Harris-Galante porous I and II acetabular components without cement: results and complications. 
  • Porous PEEK improves the bone-implant interface compared to plasma-sprayed titanium coating on PEEK. 
  • Porous Tantalum Buttress Augments for Severe Acetabular Posterior Column Deficiency. 
  • Porous biocompatible three-dimensional scaffolds of cellulose microfiber/gelatin composites for cell culture. 
  • Porous hyaluronic acid hydrogels for localized nonviral DNA delivery in a diabetic wound healing model 
  • Porous, Dexamethasone-loaded polyurethane coatings extend performance window of implantable glucose sensors in vivo. 
  • Processes of particle deposition in membrane operation and fabrication. 
  • Prospective analysis of uncemented and hybrid primary porous coated anatomic total hip arthroplasties in a community setting. 
  • Protease degradable tethers for controlled and cell-mediated release of nanoparticles in 2-and 3-dimensions 
  • Pulsating tandem microbubble for localized and directional single-cell membrane poration. 
  • Radiographic Outcomes Following Lateral Column Lengthening With a Porous Titanium Wedge. 
  • Rapid (<3 min) microwave synthesis of block copolymer templated ordered mesoporous metal oxide and carbonate films using nitrate-citric acid systems. 
  • Reconstruction of porous material geometry by stochastic optimization based on bulk NMR measurements of the dipolar field. 
  • Remobilization of residual non-aqueous phase liquid in porous media by freeze-thaw cycles. 
  • Revision of a total hip arthroplasty with a Harris-Galante porous-coated acetabular component inserted without cement. A follow-up note on the results at five to twelve years. 
  • Single residues in the outer pore of TRPV1 and TRPV3 have temperature-dependent conformations. 
  • Singular perturbation analysis of the pore creation transient. 
  • Solving the problem at the source: controlling Mn release at the sediment-water interface via hypolimnetic oxygenation 
  • Sound speed in water-saturated glass beads as a function of frequency and porosity. 
  • Structural anisotropy and internal magnetic fields in trabecular bone: coupling solution and solid dipolar interactions. 
  • Synthesis and Biological Evaluation of Well-Defined Poly(propylene fumarate) Oligomers and Their Use in 3D Printed Scaffolds. 
  • Tantalum components in difficult acetabular revisions. 
  • The Effect of Microporous Polysaccharide Hemospheres on Wound Healing and Scarring in Wild-Type and db/db Mice. 
  • The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting. 
  • The pore-domain of TRPA1 mediates the inhibitory effect of the antagonist 6-methyl-5-(2-(trifluoromethyl)phenyl)-1H-indazole. 
  • Thermal manipulation of bone cement. 
  • Thermal responsive microgels as recyclable carriers to immobilize active proteins with enhanced nonaqueous biocatalytic performance. 
  • Three-Dimensional Printing of Nano Hydroxyapatite/Poly(ester urea) Composite Scaffolds with Enhanced Bioactivity. 
  • Tissue engineering of bone: a primer for the practicing hand surgeon. 
  • Transport and retention of colloidal aggregates of C60 in porous media: effects of organic macromolecules, ionic composition, and preparation method. 
  • Transport and retention of selected engineered nanoparticles by porous media in the presence of a biofilm. 
  • Velocity effects on fullerene and oxide nanoparticle deposition in porous media. 
  • Viral infection of human progenitor and liver-derived cells encapsulated in three-dimensional PEG-based hydrogel. 
• 

  Keywords of People

  • Craciunescu, Oana, Professor of Radiation Oncology, Radiation Oncology
  • Hsu-Kim, Heileen, Professor in the Department of Civil and Environmental Engineering, Civil and Environmental Engineering