Equipment Failure Analysis

• 

  Subject Areas on Research

  • 10-year follow-up wear analysis of first-generation highly crosslinked polyethylene in primary total hip arthroplasty. 
  • 3-D ultrasound guidance of surgical robotics: a feasibility study. 
  • A 2.5-mm diameter probe for photoacoustic and ultrasonic endoscopy. 
  • A Fiber-Based Ratiometric Optical Cardiac Mapping Channel using a Diffraction Grating and Split Detector 
  • A Monte Carlo based method to estimate radiation dose from multidetector CT (MDCT): cylindrical and anthropomorphic phantoms. 
  • A compact CMOS biochip immunosensor towards the detection of a single bacteria. 
  • A comparison of the performance of time-delay estimators in medical ultrasound. 
  • A comprehensive evaluation of the PRESAGE/optical-CT 3D dosimetry system. 
  • A high-precision contrast injector for small animal x-ray digital subtraction angiography. 
  • A low-cost high-efficiency fiber-optic coupler for recording action potentials within the myocardial wall. 
  • A low-cost, scalable, current-sensing digital headstage for high channel count μECoG. 
  • A miniaturized catheter 2-D array for real-time, 3-D intracardiac echocardiography. 
  • A novel flow-perfusion bioreactor supports 3D dynamic cell culture. 
  • A novel method for quantifying scanner instability in fMRI. 
  • A novel needle-based miniature x-ray generating system. 
  • A novel phototherapy device: the design community approach for the developing world. 
  • A novel silicon array designed for intraoperative charged particle imaging. 
  • A phantom study on the positioning accuracy of the Novalis Body system. 
  • A physical model of the extreme mantis shrimp strike: kinematics and cavitation of Ninjabot. 
  • A programmable smoke delivery device for PET imaging with cigarettes containing 11C-nicotine. 
  • A quality assurance program for the on-board imager®. 
  • A single-chip signal processing and telemetry engine for an implantable 96-channel neural data acquisition system. 
  • A spline-based approach for computing spatial impulse responses. 
  • A thermal monitoring sheet with low influence from adjacent waterbolus for tissue surface thermometry during clinical hyperthermia. 
  • A transcranial magnetic stimulator inducing near-rectangular pulses with controllable pulse width (cTMS). 
  • A versatile diffractive maskless lithography for single-shot and serial microfabrication. 
  • Adaptive feature specific spectroscopy for rapid chemical identification. 
  • Adaptive imaging on a diagnostic ultrasound scanner at quasi real-time rates. 
  • An AOTF-based dual-modality hyperspectral imaging system (DMHSI) capable of simultaneous fluorescence and reflectance imaging. 
  • An ECG index of myocardial scar enhances prediction of defibrillator shocks: an analysis of the Sudden Cardiac Death in Heart Failure Trial. 
  • An adaptable mesocosm platform for performing integrated assessments of nanomaterial risk in complex environmental systems. 
  • An efficient broadband metamaterial wave retarder. 
  • An experimental comparison of detector performance for direct and indirect digital radiography systems. 
  • An ultrastructural analysis of collagen in tissue engineered arteries. 
  • Analysis of Failed Ankle Arthroplasty Components. 
  • Analysis of slitless holographic spectrometers implemented by spherical beam volume holograms. 
  • Analysis of total uncertainty in spectral peak measurements for plasmonic nanoparticle-based biosensors. 
  • Ankle fusion stability: a biomechanical comparison of external versus internal fixation. 
  • Application of MOSFET detectors for dosimetry in small animal radiography using short exposure times. 
  • Are component positioning and prosthesis size associated with hip resurfacing failure? 
  • Assessment of detective quantum efficiency: intercomparison of a recently introduced international standard with prior methods. 
  • Assessment of flat panel LCD primary class display performance based on AAPM TG 18 acceptance protocol. 
  • Attachment of gold nanoparticles to glassy carbon electrode and its application for the direct electrochemistry and electrocatalytic behavior of hemoglobin. 
  • Bimodal behavior and isobestic transition pathway in surface plasmon resonance sensing. 
  • Biomechanical comparison of hallux valgus correction using the proximal chevron osteotomy fixed with a medial locking plate and the Ludloff osteotomy fixed with two screws. 
  • Bragg grating-based fibre optic sensors in structural health monitoring. 
  • Can locking screws allow smaller, low-profile plates to achieve comparable stability to larger, standard plates? 
  • Challenges and implementation of radiation-force imaging with an intracardiac ultrasound transducer. 
  • Characteristics of Gafchromic XRQA2 films for kV image dose measurement. 
  • Characteristics of sensitometric curves of radiographic films. 
  • Characterization of a new radiochromic three-dimensional dosimeter. 
  • Characterization of the ADII-33 diamond detector. 
  • Circuit topology and control principle for a first magnetic stimulator with fully controllable waveform. 
  • Clinical assessment and characterization of a dual tube kilovoltage X-ray localization system in the radiotherapy treatment room. 
  • Cochlear implants: some likely next steps. 
  • Coded aperture Raman spectroscopy for quantitative measurements of ethanol in a tissue phantom 
  • Coded aperture compressive temporal imaging. 
  • Coil design considerations for deep-brain transcranial magnetic stimulation (dTMS). 
  • Combination of converging collimators for high-sensitivity brain SPECT. 
  • Combined hyperspectral and spectral domain optical coherence tomography microscope for noninvasive hemodynamic imaging. 
  • Commissioning a CT-compatible LDR tandem and ovoid applicator using Monte Carlo calculation and 3D dosimetry. 
  • Commissioning a small-field biological irradiator using point, 2D, and 3D dosimetry techniques. 
  • Comparative dose evaluations between XVI and OBI cone beam CT systems using Gafchromic XRQA2 film and nanoDot optical stimulated luminescence dosimeters. 
  • Comparison of Tc99m-DTPA and indium-111 DTPA studies of baclofen pump function. 
  • Comparison of edge analysis techniques for the determination of the MTF of digital radiographic systems. 
  • Comparison of radiation dose estimates, image noise, and scan duration in pediatric body imaging for volumetric and helical modes on 320-detector CT and helical mode on 64-detector CT. 
  • Comparison of real and idealized cetacean flippers. 
  • Comparison of the Mechanical Characteristics of a Universal Small Biplane Plating Technique Without Compression Screw and Single Anatomic Plate With Compression Screw. 
  • Continuous operation of foamed emulsion bioreactors treating toluene vapors. 
  • Control of a biomolecular motor-powered nanodevice with an engineered chemical switch. 
  • Controllable pulse parameter transcranial magnetic stimulator with enhanced circuit topology and pulse shaping. 
  • Cost-effective diffuse reflectance spectroscopy device for quantifying tissue absorption and scattering in vivo. 
  • Current density distributions, field distributions and impedance analysis of segmented deep brain stimulation electrodes. 
  • Current saturation in submicrometer graphene transistors with thin gate dielectric: experiment, simulation, and theory. 
  • Cystic resolution: a performance metric for ultrasound imaging systems. 
  • Delivery efficiency of an Elekta linac under gated operation. 
  • Design and fabrication of a metamaterial gradient index diffraction grating at infrared wavelengths. 
  • Design and in vivo evaluation of more efficient and selective deep brain stimulation electrodes. 
  • Design and validation of an angle-resolved low-coherence interferometry fiber probe for in vivo clinical measurements of depth-resolved nuclear morphology. 
  • Design for a simplified cochlear implant system. 
  • Design of a superconducting volume coil for magnetic resonance microscopy of the mouse brain. 
  • Design of an integrated sensor for in vivo simultaneous electrocontractile cardiac mapping. 
  • Designing a biomechanics investigation: choosing the right model. 
  • Detection and identification of bacteria using antibiotic susceptibility and a multi-array electrochemical sensor with pattern recognition. 
  • Determination of mechanical and electronic shifts for pinhole SPECT using a single point source. 
  • Determining organ dose: the holy grail. 
  • Development and characterization of a vitreous mimicking material for radiation force imaging. 
  • Development of a scalable image formation pipeline for multiscale gigapixel photography. 
  • Development of an advanced hyperspectral imaging (HSI) system with applications for cancer detection. 
  • Digital pathology with Fourier ptychography. 
  • Direct Coupling of Plasmonic and Photonic Nanowires for Hybrid Nanophotonic Components and Circuits 
  • Direct rapid-prototyping fabrication of computer-generated volume holograms in the millimeter-wave and terahertz regime. 
  • Direct sampled I/Q beamforming for compact and very low-cost ultrasound imaging. 
  • Dispersion-based stimulated Raman scattering spectroscopy, holography, and optical coherence tomography 
  • Do Surface Porosity and Pore Size Influence Mechanical Properties and Cellular Response to PEEK? 
  • Dosimetric characterisation of bismuth shields in CT: measurements and Monte Carlo simulations. 
  • Dosimetric characteristics of Novalis shaped beam surgery unit. 
  • Dosimetric characteristics of novalis Tx system with high definition multileaf collimator. 
  • Dosimetric study using different leaf-width MLCs for treatment planning of dynamic conformal arcs and intensity-modulated radiosurgery. 
  • Dual-band planar electric metamaterial in the terahertz regime. 
  • Dual-interference-channel quantitative-phase microscopy of live cell dynamics. 
  • Dynamic control and quantification of bacterial population dynamics in droplets. 
  • EXiO-A Brain-Controlled Lower Limb Exoskeleton for Rhesus Macaques. 
  • Effect of electrode surface area on thresholds for AC stimulation and ventricular fibrillation. 
  • Effectiveness of a breath-hold monitoring system in improving the reproducibility of different breath-hold positions in multiphasic CT imaging. 
  • Electric field of a six-needle array electrode used in drug and DNA delivery in vivo: analytical versus numerical solution. 
  • Electrochemical properties and myocyte interaction of carbon nanotube microelectrodes. 
  • Enhanced quantum efficiency of the visible light photon counter in the ultraviolet wavelengths. 
  • Evaluation of a flat panel digital radiographic system for low-dose portable imaging of neonates. 
  • Evaluation of fully 3-D emission mammotomography with a compact cadmium zinc telluride detector. 
  • Evaluation of tilted cone-beam CT orbits in the development of a dedicated hybrid mammotomograph. 
  • Expediting the identification of impaired channels in cochlear implants via analysis of speech-based confusion matrices. 
  • Experimental system prototype of a portable, low-cost, C-scan ultrasound imaging device. 
  • External ring fixation versus screw fixation for ankle arthrodesis: a biomechanical comparison. 
  • Extracellular-matrix-based and Arg-Gly-Asp-modified photopolymerizing hydrogels for cartilage tissue engineering. 
  • Fabrication of combinatorial polymer scaffold libraries. 
  • Fasciated nerve-muscle explants for in vitro comparison of magnetic and electrical neuromuscular stimulation. 
  • Fast modelling of the collimator-detector response in Monte Carlo simulation of SPECT imaging using the angular response function. 
  • Finite-element analysis of temperature rise and lesion formation from catheter ultrasound ablation transducers. 
  • Flattening filter-free accelerators: a report from the AAPM Therapy Emerging Technology Assessment Work Group. 
  • Flexible asymmetric supercapacitors with high energy and high power density in aqueous electrolytes. 
  • Flexible organic electronics for use in neural sensing. 
  • Flow patterns and heat convection in a rectangular water bolus for use in superficial hyperthermia. 
  • Foul tip impact attenuation of baseball catcher masks using head impact metrics. 
  • Fourier domain multispectral multiple scattering low coherence interferometry. 
  • Fourier-domain angle-resolved low coherence interferometry through an endoscopic fiber bundle for light-scattering spectroscopy. 
  • From ST-elevation myocardial infarction to ST elevation with no myocardial infarction--review and overview of a new horizon of computerized electrocardiographic ischemia detection using high-fidelity implantable devices. 
  • Full-field swept-source phase microscopy. 
  • Functional recordings from awake, behaving rodents through a microchannel based regenerative neural interface. 
  • Fundamental imaging characteristics of a slot-scan digital chest radiographic system. 
  • Harmonic phase-dispersion microscope with a Mach-Zehnder interferometer. 
  • Hepatic venous pressure measurements: comparison of end-hole and balloon catheter methods. 
  • Heterodyne swept-source optical coherence tomography for complete complex conjugate ambiguity removal. 
  • High purity isolation and quantification of semiconducting carbon nanotubes via column chromatography. 
  • High-throughput, multiplexed pushbroom hyperspectral microscopy. 
  • Imaginary magnetic tweezers for massively parallel surface adhesion spectroscopy. 
  • Imaging beyond the ballistic limit in coherence imaging using multiply scattered light. 
  • Imaging findings of liver resection using a bipolar radiofrequency electrosurgical device--initial observations. 
  • Imaging properties of digital magnification radiography. 
  • Impact of using a telescoping-support catheter system for left ventricular lead placement on implant success and procedure time of cardiac resynchronization therapy. 
  • Improved interferometric detection of scattered light with a 4f imaging system. 
  • In Vitro Evaluation of the Fresenius Kabi CATSmart Autotransfusion System. 
  • In vitro model of glial scarring around neuroelectrodes chronically implanted in the CNS. 
  • In vivo photoacoustic tomography of myoglobin oxygen saturation. 
  • In vivo spectral domain optical coherence tomography volumetric imaging and spectral Doppler velocimetry of early stage embryonic chicken heart development. 
  • Increasing the time to expander-implant exchange after postmastectomy radiation therapy reduces expander-implant failure. 
  • Integrated catheter for 3-D intracardiac echocardiography and ultrasound ablation. 
  • Integrated parallel reception, excitation, and shimming (iPRES). 
  • Integrating Cerebrospinal Fluid Shunt Quality Checks into the World Health Organization's Safe Surgery Checklist: A Pilot Study. 
  • Inter-site and inter-scanner diffusion MRI data harmonization. 
  • Intracellular Neural Recording with Pure Carbon Nanotube Probes. 
  • Laparo-endoscopic single site hysterectomy in gynecologic surgery. 
  • Lightweight biometric detection system for human classification using pyroelectric infrared detectors. 
  • Locating, quantifying and characterising radiation hazards in contaminated nuclear facilities using a novel passive non-electrical polymer based radiation imaging device. 
  • Loosely implanted cementless stems may become rotationally stable after loading. 
  • Loss compensation in metamaterials through embedding of active transistor based negative differential resistance circuits. 
  • Low-cost, scalable laser scanning module for real-time reflectance and fluorescence confocal microscopy. 
  • MOSFET dosimetry for radiation dose assessment of bismuth shielding of the eye in children. 
  • Magnetic resonance microscopy. 
  • Measurement of the detective quantum efficiency in digital detectors consistent with the IEC 62220-1 standard: Practical considerations regarding the choice of filter material. 
  • Measuring tumor cycling hypoxia and angiogenesis using a side-firing fiber optic probe. 
  • Micro-CT with respiratory and cardiac gating. 
  • Model-based analysis and design of nerve cuff electrodes for restoring bladder function by selective stimulation of the pudendal nerve. 
  • Model-based analysis of multiple electrode array stimulation for epiretinal visual prostheses. 
  • Modifying peripheral IV catheters with side holes and side slits results in favorable changes in fluid dynamic properties during the injection of iodinated contrast material. 
  • Mold-casted non-degradable, islet macro-encapsulating hydrogel devices for restoration of normoglycemia in diabetic mice. 
  • Molecular imaging of small animals with a triple-head SPECT system using pinhole collimation. 
  • Multi-center experience of 164 consecutive Hemodialysis Reliable Outflow [HeRO] graft implants for hemodialysis treatment. 
  • Multiplexed broadband beam steering system utilizing high speed MEMS mirrors. 
  • Multisite, multivendor validation of the accuracy and reproducibility of proton-density fat-fraction quantification at 1.5T and 3T using a fat-water phantom. 
  • Nail gun injuries treated in U.S emergency departments, 2006-2011: not just a worker safety issue. 
  • Narrow groove plasmonic nano-gratings for surface plasmon resonance sensing. 
  • Neutron spectrometry using CR-39 track etch detectors. 
  • Nitroxide conjugate of a thermally responsive elastin-like polypeptide for noninvasive thermometry. 
  • Novel mechanism of premature battery failure due to lithium cluster formation in implantable cardioverter-defibrillators. 
  • Novel transmit protection scheme for ultrasound systems. 
  • Nuclear morphology measurements with angle-resolved low coherence interferometry for application to cell biology and early cancer detection. 
  • Optical performance test and validation of microcameras in multiscale, gigapixel imagers. 
  • Optimal apodization design for medical ultrasound using constrained least squares part I: theory. 
  • Optimal apodization design for medical ultrasound using constrained least squares part II: simulation results. 
  • Outcomes and complications following spinous process fixation: a single-center analysis of 192 cases. 
  • Oversampled triangulation of AWARE-10 monocentric ball lens using an auto-stigmatic microscope 
  • Parallel on-axis holographic phase microscopy of biological cells and unicellular microorganism dynamics. 
  • Part II: Sealing holes in the safety net. 
  • Patient, physician, and procedural factors influencing the use of defibrillation testing during initial implantable cardioverter defibrillator insertion: findings from the NCDR®. 
  • Phase-cycling coherent anti-Stokes Raman scattering using shaped femtosecond laser pulses 
  • Phonon populations and electrical power dissipation in carbon nanotube transistors. 
  • Physical characterization of a prototype selenium-based full field digital mammography detector. 
  • Physiologic pulsatile flow bioreactor conditioning of poly(ethylene glycol)-based tissue engineered vascular grafts. 
  • Plasmon ruler with angstrom length resolution. 
  • Plasmonic multi-mode interference couplers. 
  • Polarization-resolved second-harmonic-generation optical coherence tomography in collagen. 
  • Population of anatomically variable 4D XCAT adult phantoms for imaging research and optimization. 
  • Portable UV-visible spectrometer for measuring absorbance and dichroism of Langmuir monolayers at air-water interfaces. 
  • Postmarket surveillance and returned product analysis: success but not transparency. 
  • Precoated femoral component with proximal and distal centralizers: results at 5 to 12 years. 
  • Prevalence of rupture of silicone gel breast implants revealed on MR imaging in a population of women in Birmingham, Alabama. 
  • Primary human chondrocyte extracellular matrix formation and phenotype maintenance using RGD-derivatized PEGDM hydrogels possessing a continuous Young's modulus gradient. 
  • Prognostic value of the cadmium-zinc-telluride camera: A comparison with a conventional (Anger) camera. 
  • Programmable diagnostic devices made from paper and tape. 
  • Pros and cons of organ shielding for CT imaging. 
  • Prospective grading of neoplastic change in rat esophagus epithelium using angle-resolved low-coherence interferometry. 
  • Pump-probe nonlinear phase dispersion spectroscopy. 
  • Quantitative Approach to Failure Mode and Effect Analysis for Linear Accelerator Quality Assurance. 
  • Quantitative phase imaging using actively stabilized phase-shifting low-coherence interferometry. 
  • Quantitative phase imaging via Fourier ptychographic microscopy. 
  • Quantitative phase imaging with molecular sensitivity using photoacoustic microscopy with a miniature ring transducer. 
  • Quantum dots-bienzyme hybrid system for the sensitive determination of glucose. 
  • Radiation dose for body CT protocols: variability of scanners at one institution. 
  • Radiation dose for routine clinical adult brain CT: Variability on different scanners at one institution. 
  • Rapid and inexpensive fabrication of terahertz electromagnetic bandgap structures. 
  • Rapid pulse shaping with homodyne detection for measuring nonlinear optical signals 
  • Rationale and design of the East-West late lumen loss study: Comparison of late lumen loss between Eastern and Western drug-eluting stent study cohorts. 
  • Real-time 3-D ultrasound guidance of interventional devices. 
  • Real-time rectilinear 3-D ultrasound using receive mode multiplexing. 
  • Real-time, 3-D ultrasound with multiple transducer arrays. 
  • Recommendations for evaluation of prosthetic valves with echocardiography and doppler ultrasound: a report From the American Society of Echocardiography's Guidelines and Standards Committee and the Task Force on Prosthetic Valves, developed in conjunction with the American College of Cardiology Cardiovascular Imaging Committee, Cardiac Imaging Committee of the American Heart Association, the European Association of Echocardiography, a registered branch of the European Society of Cardiology, the Japanese Society of Echocardiography and the Canadian Society of Echocardiography, endorsed by the American College of Cardiology Foundation, American Heart Association, European Association of Echocardiography, a registered branch of the European Society of Cardiology, the Japanese Society of Echocardiography, and Canadian Society of Echocardiography. 
  • Reducing contact resistance in graphene devices through contact area patterning. 
  • Relating noise to image quality indicators in CT examinations with tube current modulation. 
  • Relationship of femoral head and acetabular size to the prevalence of dislocation. 
  • Reliability and validity of instrumented soccer equipment. 
  • Repetitive transcranial magnetic stimulator with controllable pulse parameters. 
  • Results of the multicenter RENEWAL 3 AVT clinical study of cardiac resynchronization defibrillator therapy in patients with paroxysmal atrial fibrillation. 
  • Ring array transducers for real-time 3-D imaging of an atrial septal occluder. 
  • Risk factors for peripherally inserted central venous catheter complications in children. 
  • Scalable Device for Automated Microbial Electroporation in a Digital Microfluidic Platform. 
  • Seizure prediction for therapeutic devices: A review. 
  • Short-lag spatial coherence imaging on matrix arrays, part 1: Beamforming methods and simulation studies. 
  • Short-lag spatial coherence imaging on matrix arrays, part II: Phantom and in vivo experiments. 
  • Simulation study of a quasi-monochromatic beam for x-ray computed mammotomography. 
  • Simultaneous bilateral real-time 3-d transcranial ultrasound imaging at 1 MHz through poor acoustic windows. 
  • Snapshot molecular imaging using coded energy-sensitive detection. 
  • Spatial frequency-domain multiplexed microscopy for simultaneous, single-camera, one-shot, fluorescent, and quantitative-phase imaging 
  • Spectral domain second-harmonic optical coherence tomography. 
  • Spectral-domain phase microscopy. 
  • Stable optical phase modulation with micromirrors. 
  • Static two-dimensional aperture coding for multimodal, multiplex spectroscopy 
  • Strategies to Aid Identification of Apheresis PowerFlow Ports: A Case Report. 
  • Subcutaneous implantable cardioverter-defibrillator troubleshooting in patients with a left ventricular assist device: A case series and systematic review. 
  • Swept source optical coherence tomography using an all-fiber 1300-nm ring laser source. 
  • Synthetic bone mimetic matrix-mediated in situ bone tissue formation through host cell recruitment. 
  • The Pipeline Embolization Device: learning curve and predictors of complications and aneurysm obliteration. 
  • The benefits of using barbed sutures with automated suturing devices in gynecologic endoscopic surgeries. 
  • The effect of blood-drawing techniques and equipment on the hemolysis of ED laboratory blood samples. 
  • The influence of cardiograph design and automated algorithms on the incidence and detection of electrode cable reversals in an academic electrocardiogram laboratory. 
  • The mechanical energy transformations of pole vaulting with a fiberglass pole. 
  • The surprising performance of present-day cochlear implants. 
  • Theory and operation of 2-D array piezoelectric micromachined ultrasound transducers. 
  • Three-dimensional imaging of whole rodent organs using optical computed and emission tomography. 
  • Time delay measurement for linac based treatment delivery in synchronized respiratory gating radiotherapy. 
  • Time-resolved investigation of bright visible wavelength luminescence from sulfur-doped ZnO nanowires and micropowders. 
  • Time-resolved optical tomography using short-pulse laser for tumor detection. 
  • To excise or not: impact of MelaFind on German dermatologists' decisions to biopsy atypical lesions. 
  • Transcranial magnetic stimulation coil with electronically switchable active and sham modes. 
  • Transesophageal assessment of left atrial thrombus using a 3.3-mm monoplane probe. 
  • Transformation-optical design of adaptive beam bends and beam expanders. 
  • Transverse flow imaging based on photoacoustic Doppler bandwidth broadening. 
  • Tutorial on photoacoustic tomography. 
  • Two-color, two-photon, and excited-state absorption microscopy. 
  • Use of genetic algorithms to optimize fiber optic probe design for the extraction of tissue optical properties. 
  • Use of modular large femoral heads without liners in hip arthroplasty. 
  • Use of the Outreach Distal Access Catheter for microcatheter stabilization during intracranial arteriovenous malformation embolization. 
  • Use of the monoplane intracardiac imaging probe in high-risk infants during congenital heart surgery. 
  • Versatile, Reusable, and Inexpensive Ultrasound Phantom Procedural Trainers. 
  • Very-high-resolution tandem Fabry-Perot etalon cylindrical beam volume hologram spectrometer for diffuse source spectroscopy. 
  • Vibrating interventional device detection using real-time 3-D color Doppler. 
  • Video rate spectral imaging using a coded aperture snapshot spectral imager. 
  • Wide-field fast-scanning photoacoustic microscopy based on a water-immersible MEMS scanning mirror. 
  • Wireless multichannel biopotential recording using an integrated FM telemetry circuit. 
  • Wireless surveillance for transjugular intrahepatic portosystemic shunts (TIPS): a feasibility study. 
• 

  Keywords of People

  • Allori, Alexander C, Associate Professor of Surgery, Surgery, Plastic, Maxillofacial, and Oral Surgery
  • Badea, Cristian Tudorel, Professor in Radiology, Biomedical Engineering
  • Barker, Piers Christopher Andrew, Professor of Pediatrics, Pediatrics, Cardiology
  • Craciunescu, Oana, Professor of Radiation Oncology, Radiation Oncology
  • Jokerst, Nan Marie, J. A. Jones Distinguished Professor of Electrical and Computer Engineering, Nicholas Institute-Energy Initiative
  • O'Daniel, Jennifer Colleen, Assistant Professor of Radiation Oncology, Radiation Oncology