Skip to main content

WE-G-108-06: Evaluating Pre-Treatment IMRT & VMAT QA Techniques Quantitatively Using Receiver Operating Characteristic (ROC) Analysis.

Publication ,  Journal Article
Mitchell, A; Adamson, J
Published in: Med Phys
June 2013

PURPOSE: Pre-treatment IMRT and VMAT QA techniques are often commissioned without knowledge of their sensitivity to clinically relevant delivery errors. The purpose of this work is to develop a method to quantify the sensitivity and specificity of pre-treatment IMRT and VMAT QA techniques to treatment delivery errors. METHODS: To evaluate a QA technique, a population of treatment plans and a population of clinically relevant delivery errors are defined. For each delivery error, a threshold magnitude is determined that induces a substantial change in clinically relevant dosimetric indices. Errors at the threshold magnitude are introduced into the plans and QA is performed with and without intentionally introduced errors. The QA technique is treated as a binary classifier to predict error plans using Receiver Operator Characteristic (ROC) analysis. We applied this technique to evaluate portal imager and 2D ion chamber array based QA for VMAT treatment of brain lesions. Delivery errors included discrepancies in MLC positioning (single leaf and leaf bank); lag of MLC trajectory; and discrepancy in dose rate per control point or gantry angle. The threshold magnitude was determined by achieving a 5% change in target conformity index. RESULTS: The area under the curve (AUC) for the ROC analysis was 0.592 and 0.509 for the ion chamber array and portal imager, respectively, using a gamma index of 3%, 3mm. The AUC increased to 0.632 and 0.777 when 2%, 2mm was used for the ion chamber array and portal imager, respectively. Comparison based on 3% dose agreement resulted in an AUC of 0.557 and 0.693, respectively. CONCLUSION: For both portal imager and ion chamber array based QA, stricter tolerance than 3%, 3mm is needed to detect clinically relevant delivery errors. This method can be used to quantitatively compare the sensitivity of various QA techniques to clinically relevant dosimetric errors.

Duke Scholars

Published In

Med Phys

DOI

EISSN

2473-4209

Publication Date

June 2013

Volume

40

Issue

6Part30

Start / End Page

502

Location

United States

Related Subject Headings

  • Nuclear Medicine & Medical Imaging
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
  • 1112 Oncology and Carcinogenesis
  • 0903 Biomedical Engineering
  • 0299 Other Physical Sciences
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Mitchell, A., & Adamson, J. (2013). WE-G-108-06: Evaluating Pre-Treatment IMRT & VMAT QA Techniques Quantitatively Using Receiver Operating Characteristic (ROC) Analysis. Med Phys, 40(6Part30), 502. https://doi.org/10.1118/1.4815630
Mitchell, A., and J. Adamson. “WE-G-108-06: Evaluating Pre-Treatment IMRT & VMAT QA Techniques Quantitatively Using Receiver Operating Characteristic (ROC) Analysis.Med Phys 40, no. 6Part30 (June 2013): 502. https://doi.org/10.1118/1.4815630.
Mitchell, A., and J. Adamson. “WE-G-108-06: Evaluating Pre-Treatment IMRT & VMAT QA Techniques Quantitatively Using Receiver Operating Characteristic (ROC) Analysis.Med Phys, vol. 40, no. 6Part30, June 2013, p. 502. Pubmed, doi:10.1118/1.4815630.

Published In

Med Phys

DOI

EISSN

2473-4209

Publication Date

June 2013

Volume

40

Issue

6Part30

Start / End Page

502

Location

United States

Related Subject Headings

  • Nuclear Medicine & Medical Imaging
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
  • 1112 Oncology and Carcinogenesis
  • 0903 Biomedical Engineering
  • 0299 Other Physical Sciences