Skip to main content

A low-frequency versatile wireless power transfer technology for biomedical implants.

Publication ,  Journal Article
Jiang, H; Zhang, J; Lan, D; Chao, ; Liou, S; Shahnasser, H; Fechter, R; Hirose, S; Harrison, M; Roy, S
Published in: IEEE transactions on biomedical circuits and systems
August 2013

Implantable biomedical sensors and actuators are highly desired in modern medicine. In many cases, the implant's electrical power source profoundly determines its overall size and performance . The inductively coupled coil pair operating at the radio-frequency (RF) has been the primary method for wirelessly delivering electrical power to implants for the last three decades . Recent designs significantly improve the power delivery efficiency by optimizing the operating frequency, coil size and coil distance . However, RF radiation hazard and tissue absorption are the concerns in the RF wireless power transfer technology (RF-WPTT) , . Also, it requires an accurate impedance matching network that is sensitive to operating environments between the receiving coil and the load for efficient power delivery . In this paper, a novel low-frequency wireless power transfer technology (LF-WPTT) using rotating rare-earth permanent magnets is demonstrated. The LF-WPTT is able to deliver 2.967 W power at  ∼ 180 Hz to an 117.1 Ω resistor over 1 cm distance with 50% overall efficiency. Because of the low operating frequency, RF radiation hazard and tissue absorption are largely avoided, and the power delivery efficiency from the receiving coil to the load is independent of the operating environment. Also, there is little power loss observed in the LF-WPTT when the receiving coil is enclosed by non-magnetic implant-grade stainless steel.

Altmetric Attention Stats
Dimensions Citation Stats

Published In

IEEE transactions on biomedical circuits and systems

DOI

EISSN

1940-9990

ISSN

1932-4545

Publication Date

August 2013

Volume

7

Issue

4

Start / End Page

526 / 535

Related Subject Headings

  • Wireless Technology
  • Radio Waves
  • Prostheses and Implants
  • Humans
  • Electricity
  • Electrical & Electronic Engineering
  • Electric Power Supplies
  • Biomedical Technology
  • 4009 Electronics, sensors and digital hardware
  • 4003 Biomedical engineering
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Jiang, H., Zhang, J., Lan, D., Chao, ., Liou, S., Shahnasser, H., … Roy, S. (2013). A low-frequency versatile wireless power transfer technology for biomedical implants. IEEE Transactions on Biomedical Circuits and Systems, 7(4), 526–535. https://doi.org/10.1109/tbcas.2012.2220763
Jiang, Hao, Junmin Zhang, Di Lan, Di Chao, Shyshenq Liou, Hamid Shahnasser, Richard Fechter, Shinjiro Hirose, Michael Harrison, and Shuvo Roy. “A low-frequency versatile wireless power transfer technology for biomedical implants.IEEE Transactions on Biomedical Circuits and Systems 7, no. 4 (August 2013): 526–35. https://doi.org/10.1109/tbcas.2012.2220763.
Jiang H, Zhang J, Lan D, Chao, Liou S, Shahnasser H, et al. A low-frequency versatile wireless power transfer technology for biomedical implants. IEEE transactions on biomedical circuits and systems. 2013 Aug;7(4):526–35.
Jiang, Hao, et al. “A low-frequency versatile wireless power transfer technology for biomedical implants.IEEE Transactions on Biomedical Circuits and Systems, vol. 7, no. 4, Aug. 2013, pp. 526–35. Epmc, doi:10.1109/tbcas.2012.2220763.
Jiang H, Zhang J, Lan D, Chao, Liou S, Shahnasser H, Fechter R, Hirose S, Harrison M, Roy S. A low-frequency versatile wireless power transfer technology for biomedical implants. IEEE transactions on biomedical circuits and systems. 2013 Aug;7(4):526–535.

Published In

IEEE transactions on biomedical circuits and systems

DOI

EISSN

1940-9990

ISSN

1932-4545

Publication Date

August 2013

Volume

7

Issue

4

Start / End Page

526 / 535

Related Subject Headings

  • Wireless Technology
  • Radio Waves
  • Prostheses and Implants
  • Humans
  • Electricity
  • Electrical & Electronic Engineering
  • Electric Power Supplies
  • Biomedical Technology
  • 4009 Electronics, sensors and digital hardware
  • 4003 Biomedical engineering