Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal
Publication
, Journal Article
Li, SB; Wu, HR; Wang, ZH; Liu, K; Du, WB
Published in: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
April 1, 2016
The Mg-Zn-Gd icosahedral quasicrystal master alloy particles was added into the AZ31 alloy by the repeated plastic working (RPW) process in order to produce AZ31 based composite reinforced by the icosahedral phase. The wear-resistance of the alloys and compositions under a lower load were investigated. The results show that the distribution of reinforcement in the composite with 10% (mass fraction) quasi-crystal master alloy is significantly uniform. The wear coefficient of the AZ31 alloy and composites decreases as the load increases. On the whole, the addition of high-stable and high-hard icosahedral quasicrystal leads to obvious improvement of wear-resistance property.
Duke Scholars
Published In
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
ISSN
1004-0609
Publication Date
April 1, 2016
Volume
26
Issue
4
Start / End Page
732 / 738
Related Subject Headings
- Materials
- 0914 Resources Engineering and Extractive Metallurgy
Citation
APA
Chicago
ICMJE
MLA
NLM
Li, S. B., Wu, H. R., Wang, Z. H., Liu, K., & Du, W. B. (2016). Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 26(4), 732–738.
Li, S. B., H. R. Wu, Z. H. Wang, K. Liu, and W. B. Du. “Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal.” Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals 26, no. 4 (April 1, 2016): 732–38.
Li SB, Wu HR, Wang ZH, Liu K, Du WB. Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. 2016 Apr 1;26(4):732–8.
Li, S. B., et al. “Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal.” Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, vol. 26, no. 4, Apr. 2016, pp. 732–38.
Li SB, Wu HR, Wang ZH, Liu K, Du WB. Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. 2016 Apr 1;26(4):732–738.
Published In
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals
ISSN
1004-0609
Publication Date
April 1, 2016
Volume
26
Issue
4
Start / End Page
732 / 738
Related Subject Headings
- Materials
- 0914 Resources Engineering and Extractive Metallurgy