An acoustic boundary element method based on energy and intensity variables for prediction of high-frequency broadband sound fields

A boundary element method is formulated in terms of time-averaged energy and intensity variables. The approach is applicable to high modal density fields but is not restricted to the usual low-absorption, diffuse, and quasiuniform assumptions. A broadband acoustic energy/intensity source is the basic building block for the method. A directivity pattern for the source is derived to account for local spatial correlation effects and to model specular reflections approximately. A distribution of infinitesimal, uncorrelated, directional sources is used to model the boundaries of an enclosure. These sources are discretized in terms of boundary elements. A system of equations results from applying boundary conditions in terms of incident, reflected, and absorbed intensity. The unknown source power for each element is determined from this system of equations. A two-dimensional model problem is used to demonstrate and verify the method. Exact numerical solutions were also obtained for this model problem. The results show that spatially varying mean-square pressure levels are accurately predicted at very low computational cost. © 2001 Acoustical Society of America.

Duke Scholars

Author Linda Franzoni Thomas Lord Department of Mechanical Engineering and Materia ...

Author Donald B. Bliss Thomas Lord Department of Mechanical Engineering and Materia ...