Single-crystal thin film InP: Fabrication and absorption measurements

Journal Article (Journal Article)

A new process for separating high quality single-crystal InP thin films from the growth substrate is reported. These thin films were used for transmission measurements to determine InP absorption coefficients above the band edge. Photoluminescence measurements performed on these films before and after the fabrication process verified that the high quality of the separated thin film was not affected by the fabrication process. Two n-type InP thin films, one with a doping concentration of 1.4×1017 cm -3 (1 μm thick) and the other with a doping concentration of 3.2×1018 cm-3 (2.5 μm thick), were grown and subsequently separated from the substrate. Using these separated films, the first direct transmission measurements of above band edge absorption coefficients in doped InP films are reported in this letter.

Full Text

Duke Authors

Cited Authors

  • Augustine, G; Jokerst, NM; Rohatgi, A

Published Date

  • December 1, 1992

Published In

Volume / Issue

  • 61 / 12

Start / End Page

  • 1429 - 1431

International Standard Serial Number (ISSN)

  • 0003-6951

Digital Object Identifier (DOI)

  • 10.1063/1.107560

Citation Source

  • Scopus