Aligned graphene nanoribbons and crossbars from unzipped carbon nanotubes

Published

Journal Article

Aligned graphene nanoribbon (GNR) arrays have been made by unzipping of aligned single-walled and few-walled carbon nanotube (CNT) arrays. Nanotube unzipping was achieved by a polymer-protected Ar plasma etching method, and the resulting nanoribbon array can be transferred onto any chosen substrate. Atomic force microscope (AFM) imaging and Raman mapping on the same CNTs before and after unzipping confirmed that ~80% of CNTs were opened up to form single layer sub-10 nm GNRs. Electrical devices made from the GNRs (after annealing in H2 at high temperature) showed on/off current (Ion/Ioff) ratios up to 103 at room temperature, suggesting the semiconducting nature of the narrow GNRs. Novel GNR-GNR and GNR-CNT crossbars were fabricated by transferring GNR arrays across GNR and CNT arrays, respectively. The production of such ordered graphene nanoribbon architectures may allow for large scale integration of GNRs into nanoelectronics or optoelectronics. © 2010 Tsinghua University Press and Springer-Verlag Berlin Heidelberg.

Full Text

Duke Authors

Cited Authors

  • Jiao, L; Zhang, L; Ding, L; Liu, J; Dai, H

Published Date

  • June 1, 2010

Published In

Volume / Issue

  • 3 / 6

Start / End Page

  • 387 - 394

Electronic International Standard Serial Number (EISSN)

  • 1998-0000

International Standard Serial Number (ISSN)

  • 1998-0124

Digital Object Identifier (DOI)

  • 10.1007/s12274-010-1043-z

Citation Source

  • Scopus