Skip to main content

Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry.

Publication ,  Journal Article
Trattner, S; Cheng, B; Pieniazek, RL; Hoffmann, U; Douglas, PS; Einstein, AJ
Published in: Med Phys
April 2014

PURPOSE: Effective dose (ED) is a widely used metric for comparing ionizing radiation burden between different imaging modalities, scanners, and scan protocols. In computed tomography (CT), ED can be estimated by performing scans on an anthropomorphic phantom in which metal-oxide-semiconductor field-effect transistor (MOSFET) solid-state dosimeters have been placed to enable organ dose measurements. Here a statistical framework is established to determine the sample size (number of scans) needed for estimating ED to a desired precision and confidence, for a particular scanner and scan protocol, subject to practical limitations. METHODS: The statistical scheme involves solving equations which minimize the sample size required for estimating ED to desired precision and confidence. It is subject to a constrained variation of the estimated ED and solved using the Lagrange multiplier method. The scheme incorporates measurement variation introduced both by MOSFET calibration, and by variation in MOSFET readings between repeated CT scans. Sample size requirements are illustrated on cardiac, chest, and abdomen-pelvis CT scans performed on a 320-row scanner and chest CT performed on a 16-row scanner. RESULTS: Sample sizes for estimating ED vary considerably between scanners and protocols. Sample size increases as the required precision or confidence is higher and also as the anticipated ED is lower. For example, for a helical chest protocol, for 95% confidence and 5% precision for the ED, 30 measurements are required on the 320-row scanner and 11 on the 16-row scanner when the anticipated ED is 4 mSv; these sample sizes are 5 and 2, respectively, when the anticipated ED is 10 mSv. CONCLUSIONS: Applying the suggested scheme, it was found that even at modest sample sizes, it is feasible to estimate ED with high precision and a high degree of confidence. As CT technology develops enabling ED to be lowered, more MOSFET measurements are needed to estimate ED with the same precision and confidence.

Duke Scholars

Published In

Med Phys

DOI

EISSN

2473-4209

Publication Date

April 2014

Volume

41

Issue

4

Start / End Page

042102

Location

United States

Related Subject Headings

  • Transistors, Electronic
  • Tomography, X-Ray Computed
  • Radiometry
  • Radiation Dosage
  • Phantoms, Imaging
  • Oxides
  • Nuclear Medicine & Medical Imaging
  • Metals
  • Humans
  • 5105 Medical and biological physics
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Trattner, S., Cheng, B., Pieniazek, R. L., Hoffmann, U., Douglas, P. S., & Einstein, A. J. (2014). Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry. Med Phys, 41(4), 042102. https://doi.org/10.1118/1.4868693
Trattner, Sigal, Bin Cheng, Radoslaw L. Pieniazek, Udo Hoffmann, Pamela S. Douglas, and Andrew J. Einstein. “Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry.Med Phys 41, no. 4 (April 2014): 042102. https://doi.org/10.1118/1.4868693.
Trattner, Sigal, et al. “Sample size requirements for estimating effective dose from computed tomography using solid-state metal-oxide-semiconductor field-effect transistor dosimetry.Med Phys, vol. 41, no. 4, Apr. 2014, p. 042102. Pubmed, doi:10.1118/1.4868693.

Published In

Med Phys

DOI

EISSN

2473-4209

Publication Date

April 2014

Volume

41

Issue

4

Start / End Page

042102

Location

United States

Related Subject Headings

  • Transistors, Electronic
  • Tomography, X-Ray Computed
  • Radiometry
  • Radiation Dosage
  • Phantoms, Imaging
  • Oxides
  • Nuclear Medicine & Medical Imaging
  • Metals
  • Humans
  • 5105 Medical and biological physics