Skip to main content

A design and performance analysis of laboratory fume hoods

Publication ,  Journal Article
Smith, TC; Flynn, MR; Dement, JM
Published in: Applied Occupational and Environmental Hygiene
1994

The design and performance of typical laboratory hoods found in a large biomedical research facility are evaluated. The objective of the project is to examine specific design parameters and work practices which affect hood performance and result in worker exposure. The field work includes quantitative and qualitative evaluation of three auxiliary air supply hoods. Hoods were challenged with smoke which permits observation of air flow within them. Measurements were taken to characterize the distribution of velocity across the hood face. Finally, hoods were challenged with sulfur hexafluoride tracer gas, and peak concentrations leaking from them were measured in the breathing zone of a life-size mannequin. Variables affecting laboratory hood performance that are examined here include: baffle position, face velocity, and tracer gas challenge height. Each of these has a significant effect on the containment efficiency of the hood. The tests enable determination of appropriate operating conditions, and identify proper work practices for reducing potential employee exposure. These parameters can be controlled by the employees, health and safety personnel, and facility engineers to help provide optimum performance. © 1994.

Duke Scholars

Published In

Applied Occupational and Environmental Hygiene

ISSN

1047-322X

Publication Date

1994

Volume

9

Issue

2

Start / End Page

117 / 124

Related Subject Headings

  • Environmental & Occupational Health
  • 4206 Public health
  • 3505 Human resources and industrial relations
  • 1117 Public Health and Health Services
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Smith, T. C., Flynn, M. R., & Dement, J. M. (1994). A design and performance analysis of laboratory fume hoods. Applied Occupational and Environmental Hygiene, 9(2), 117–124.
Smith, T. C., M. R. Flynn, and J. M. Dement. “A design and performance analysis of laboratory fume hoods.” Applied Occupational and Environmental Hygiene 9, no. 2 (1994): 117–24.
Smith TC, Flynn MR, Dement JM. A design and performance analysis of laboratory fume hoods. Applied Occupational and Environmental Hygiene. 1994;9(2):117–24.
Smith, T. C., et al. “A design and performance analysis of laboratory fume hoods.” Applied Occupational and Environmental Hygiene, vol. 9, no. 2, 1994, pp. 117–24.
Smith TC, Flynn MR, Dement JM. A design and performance analysis of laboratory fume hoods. Applied Occupational and Environmental Hygiene. 1994;9(2):117–124.

Published In

Applied Occupational and Environmental Hygiene

ISSN

1047-322X

Publication Date

1994

Volume

9

Issue

2

Start / End Page

117 / 124

Related Subject Headings

  • Environmental & Occupational Health
  • 4206 Public health
  • 3505 Human resources and industrial relations
  • 1117 Public Health and Health Services