Skip to main content

Noise and spatial resolution properties of a commercially available deep learning-based CT reconstruction algorithm.

Publication ,  Journal Article
Solomon, J; Lyu, P; Marin, D; Samei, E
Published in: Med Phys
September 2020

PURPOSE: To characterize the noise and spatial resolution properties of a commercially available deep learning-based computed tomography (CT) reconstruction algorithm. METHODS: Two phantom experiments were performed. The first used a multisized image quality phantom (Mercury v3.0, Duke University) imaged at five radiation dose levels (CTDIvol : 0.9, 1.2, 3.6, 7.0, and 22.3 mGy) with a fixed tube current technique on a commercial CT scanner (GE Revolution CT). Images were reconstructed with conventional (FBP), iterative (GE ASiR-V), and deep learning-based (GE True Fidelity) reconstruction algorithms. Noise power spectrum (NPS), high-contrast (air-polyethylene interface), and intermediate-contrast (water-polyethylene interface) task transfer functions (TTF) were measured for each dose level and phantom size and summarized in terms of average noise frequency (fav ) and frequency at which the TTF was reduced to 50% (f50% ), respectively. The second experiment used a custom phantom with low-contrast rods and lung texture sections for the assessment of low-contrast TTF and noise spatial distribution. The phantom was imaged at five dose levels (CTDIvol : 1.0, 2.1, 3.0, 6.0, and 10.0 mGy) with 20 repeated scans at each dose, and images reconstructed with the same reconstruction algorithms. The local noise stationarity was assessed by generating spatial noise maps from the ensemble of repeated images and computing a noise inhomogeneity index, η , following AAPM TG233 methods. All measurements were compared among the algorithms. RESULTS: Compared to FBP, noise magnitude was reduced on average (± one standard deviation) by 74 ± 6% and 68 ± 4% for ASiR-V (at "100%" setting) and True Fidelity (at "High" setting), respectively. The noise texture from ASiR-V had substantially lower noise frequency content with 55 ± 4% lower NPS fav compared to FBP while True Fidelity had only marginally different noise frequency content with 9 ± 5% lower NPS fav compared to FBP. Both ASiR-V and True Fidelity demonstrated locally nonstationary noise in a lung texture background at all radiation dose levels, with higher noise near high-contrast edges of vessels and lower noise in uniform regions. At the 1.0 mGy dose level η values were 314% and 271% higher in ASiR-V and True Fidelity compared to FBP, respectively. High-contrast spatial resolution was similar between all algorithms for all dose levels and phantom sizes (<3% difference in TTF f50% ). Compared to FBP, low-contrast spatial resolution was lower for ASiR-V and True Fidelity with a reduction of TTF f50% of up to 42% and 36%, respectively. CONCLUSIONS: The deep learning-based CT reconstruction demonstrated a strong noise magnitude reduction compared to FBP while maintaining similar noise texture and high-contrast spatial resolution. However, the algorithm resulted in images with a locally nonstationary noise in lung textured backgrounds and had somewhat degraded low-contrast spatial resolution similar to what has been observed in currently available iterative reconstruction techniques.

Duke Scholars

Altmetric Attention Stats
Dimensions Citation Stats

Published In

Med Phys

DOI

EISSN

2473-4209

Publication Date

September 2020

Volume

47

Issue

9

Start / End Page

3961 / 3971

Location

United States

Related Subject Headings

  • Tomography, X-Ray Computed
  • Radiographic Image Interpretation, Computer-Assisted
  • Radiation Dosage
  • Phantoms, Imaging
  • Nuclear Medicine & Medical Imaging
  • Humans
  • Deep Learning
  • Algorithms
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Solomon, J., Lyu, P., Marin, D., & Samei, E. (2020). Noise and spatial resolution properties of a commercially available deep learning-based CT reconstruction algorithm. Med Phys, 47(9), 3961–3971. https://doi.org/10.1002/mp.14319
Solomon, Justin, Peijei Lyu, Daniele Marin, and Ehsan Samei. “Noise and spatial resolution properties of a commercially available deep learning-based CT reconstruction algorithm.Med Phys 47, no. 9 (September 2020): 3961–71. https://doi.org/10.1002/mp.14319.
Solomon, Justin, et al. “Noise and spatial resolution properties of a commercially available deep learning-based CT reconstruction algorithm.Med Phys, vol. 47, no. 9, Sept. 2020, pp. 3961–71. Pubmed, doi:10.1002/mp.14319.

Published In

Med Phys

DOI

EISSN

2473-4209

Publication Date

September 2020

Volume

47

Issue

9

Start / End Page

3961 / 3971

Location

United States

Related Subject Headings

  • Tomography, X-Ray Computed
  • Radiographic Image Interpretation, Computer-Assisted
  • Radiation Dosage
  • Phantoms, Imaging
  • Nuclear Medicine & Medical Imaging
  • Humans
  • Deep Learning
  • Algorithms
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering