Inhalation exposure system used for acute and repeated-dose methyl isocyanate exposures of laboratory animals.
Laboratory animals were exposed by inhalation for 2 hr/day (acute) or 6 hr/day (four consecutive days, repeated dose) to methyl isocyanate (MIC). Exposures were conducted in stainless steel and glass inhalation exposure chambers placed in stainless steel, wire mesh cages. MIC was delivered with nitrogen via stainless steel and Teflon supply lines. Chamber concentrations ranged from 0 to 60 ppm and were monitored continuously with infrared spectrophotometers to 1 ppm and at 2-hr intervals to 20 ppb with a high performance liquid chromatograph equipped with a fluorescence detector. Other operational parameters monitored on a continuous basis included chamber temperature (20-27 degrees C), relative humidity (31-64%), static (transmural) pressure (-0.3 in.), and flow (300-500 L/min). The computer-assistance system interfaced with the inhalation exposure laboratory is described in detail, including the analytical instrumentation calibration system used throughout this investigation.
Duke Scholars
Published In
DOI
ISSN
Publication Date
Volume
Start / End Page
Location
Related Subject Headings
- Volatilization
- Toxicology
- Rats
- Mice
- Isocyanates
- Environmental Monitoring
- Environment, Controlled
- Cyanates
- Computer Systems
- Animals
Citation
Published In
DOI
ISSN
Publication Date
Volume
Start / End Page
Location
Related Subject Headings
- Volatilization
- Toxicology
- Rats
- Mice
- Isocyanates
- Environmental Monitoring
- Environment, Controlled
- Cyanates
- Computer Systems
- Animals