Skip to main content

Nonquasi-steady character of pulsatile flow in human coronary arteries

Publication ,  Journal Article
Mark, FF; Bargeron, CB; Deters, OJ; Friedman, MH
Published in: Trans. ASME, J. Biomech. Eng. (USA)
1985

This experiment was conducted to determine if the pulsatile flow through the proximal portion of the left coronary artery system in man exhibits quasi-steady characteristics. Steady and pulsatile flows were passed through an idealized model whose dimensions were based on a vascular cast. The mean Reynolds number was 180 and the unsteadiness number was 2.7. Velocity profiles were measured by laser Doppler anemometry at several locations along diameters in the parent and both daughter channels in the neighborhood of the `left main' bifurcation. Analysis of the results along one diameter in the `left main' channel shows that unsteady flow in the larger coronary arteries may not be simulated by a series of steady flow experiments

Duke Scholars

Published In

Trans. ASME, J. Biomech. Eng. (USA)

Publication Date

1985

Volume

107

Issue

1

Start / End Page

24 / 28
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Mark, F. F., Bargeron, C. B., Deters, O. J., & Friedman, M. H. (1985). Nonquasi-steady character of pulsatile flow in human coronary arteries. Trans. ASME, J. Biomech. Eng. (USA), 107(1), 24–28.
Mark, F. F., C. B. Bargeron, O. J. Deters, and M. H. Friedman. “Nonquasi-steady character of pulsatile flow in human coronary arteries.” Trans. ASME, J. Biomech. Eng. (USA) 107, no. 1 (1985): 24–28.
Mark FF, Bargeron CB, Deters OJ, Friedman MH. Nonquasi-steady character of pulsatile flow in human coronary arteries. Trans ASME, J Biomech Eng (USA). 1985;107(1):24–8.
Mark, F. F., et al. “Nonquasi-steady character of pulsatile flow in human coronary arteries.” Trans. ASME, J. Biomech. Eng. (USA), vol. 107, no. 1, 1985, pp. 24–28.
Mark FF, Bargeron CB, Deters OJ, Friedman MH. Nonquasi-steady character of pulsatile flow in human coronary arteries. Trans ASME, J Biomech Eng (USA). 1985;107(1):24–28.

Published In

Trans. ASME, J. Biomech. Eng. (USA)

Publication Date

1985

Volume

107

Issue

1

Start / End Page

24 / 28