Matched Windows in Circular Waveguide
Publication
, Journal Article
Carin, L; Webb, KJ; Weinreb, S
Published in: IEEE Transactions on Microwave Theory and Techniques
January 1, 1988
Design curves are presented for the matching of a dielectric window in circular waveguide propagating the dominant TE11 mode. The matching is accomplished by thick or thin inductive irises which are in contact with the window on both sides. This configuration gives wide bandwidth and is mechanically convenient, but requires consideration of coupling of the higher order modes generated by the closely spaced discontinuities. Mode matching and the generalized scattering matrix are utilized. © 1988 IEEE
Duke Scholars
Altmetric Attention Stats
Dimensions Citation Stats
Published In
IEEE Transactions on Microwave Theory and Techniques
DOI
EISSN
1557-9670
ISSN
0018-9480
Publication Date
January 1, 1988
Volume
36
Issue
9
Start / End Page
1359 / 1362
Related Subject Headings
- Networking & Telecommunications
- 5103 Classical physics
- 1005 Communications Technologies
- 0906 Electrical and Electronic Engineering
Citation
APA
Chicago
ICMJE
MLA
NLM
Carin, L., Webb, K. J., & Weinreb, S. (1988). Matched Windows in Circular Waveguide. IEEE Transactions on Microwave Theory and Techniques, 36(9), 1359–1362. https://doi.org/10.1109/22.3683
Published In
IEEE Transactions on Microwave Theory and Techniques
DOI
EISSN
1557-9670
ISSN
0018-9480
Publication Date
January 1, 1988
Volume
36
Issue
9
Start / End Page
1359 / 1362
Related Subject Headings
- Networking & Telecommunications
- 5103 Classical physics
- 1005 Communications Technologies
- 0906 Electrical and Electronic Engineering