Skip to main content
Journal cover image

Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar

Publication ,  Journal Article
Plaut, RH; Favor, HM; Jeffers, AE; Virgin, LN
Published in: Journal of Sound and Vibration
February 5, 2008

The use of buckled columns, or pairs of pre-bent columns bonded with a viscoelastic filler, as vibration isolators is analyzed. They support a horizontal rigid bar at its ends, and harmonic vertical motion is applied at the base of the isolators. The displacement transmissibility is analyzed for both symmetric and asymmetric bars. In the latter case, the bar exhibits rotational as well as translational motion. Each column is modeled as an elastica, allowing for large deflections. Small steady-state vibrations about the equilibrium configuration of the system are analyzed. After formulation of the governing equations, a shooting method is utilized to obtain numerical solutions in Mathematica. The transmissibility is plotted as a function of the excitation frequency, and vibration shapes associated with peaks in the transmissibility plots are shown. For the buckled single-column isolators, the effect of the amount of asymmetry of the bar is examined. For the bonded two-column pre-bent isolators, the effects of the filler stiffness, amount of initial curvature, and supported weight are determined. The isolators can be effective for a large range of excitation frequencies. © 2007 Elsevier Ltd. All rights reserved.

Duke Scholars

Published In

Journal of Sound and Vibration

DOI

EISSN

1095-8568

ISSN

0022-460X

Publication Date

February 5, 2008

Volume

310

Issue

1-2

Start / End Page

409 / 420

Related Subject Headings

  • Acoustics
  • 51 Physical sciences
  • 40 Engineering
  • 09 Engineering
  • 02 Physical Sciences
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Plaut, R. H., Favor, H. M., Jeffers, A. E., & Virgin, L. N. (2008). Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar. Journal of Sound and Vibration, 310(1–2), 409–420. https://doi.org/10.1016/j.jsv.2007.09.037
Plaut, R. H., H. M. Favor, A. E. Jeffers, and L. N. Virgin. “Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar.” Journal of Sound and Vibration 310, no. 1–2 (February 5, 2008): 409–20. https://doi.org/10.1016/j.jsv.2007.09.037.
Plaut RH, Favor HM, Jeffers AE, Virgin LN. Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar. Journal of Sound and Vibration. 2008 Feb 5;310(1–2):409–20.
Plaut, R. H., et al. “Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar.” Journal of Sound and Vibration, vol. 310, no. 1–2, Feb. 2008, pp. 409–20. Scopus, doi:10.1016/j.jsv.2007.09.037.
Plaut RH, Favor HM, Jeffers AE, Virgin LN. Vibration isolation using buckled or pre-bent columns-Part 1: Two-dimensional motions of horizontal rigid bar. Journal of Sound and Vibration. 2008 Feb 5;310(1–2):409–420.
Journal cover image

Published In

Journal of Sound and Vibration

DOI

EISSN

1095-8568

ISSN

0022-460X

Publication Date

February 5, 2008

Volume

310

Issue

1-2

Start / End Page

409 / 420

Related Subject Headings

  • Acoustics
  • 51 Physical sciences
  • 40 Engineering
  • 09 Engineering
  • 02 Physical Sciences