A new structure for an analog divider
Publication
, Journal Article
Thomsen, A; Brooke, MA
Published in: Proceedings IEEE International Symposium on Circuits and Systems
December 1, 1990
A structure for an analog divider that allows the use of short-channel devices for high speed without loss in accuracy due to second-order effects is proposed. It consists of 13 parallel modules that each approximate a division in a small region. The weighted sum of all outputs approximates a division for ratios between 1/4 and 4. The design of the modules and the complete circuit is explained. The circuit has been fabricated in a 2-μm CMOS technology. The accuracy is better than 10% and the maximum operating frequency is about 2 MHz.
Duke Scholars
Published In
Proceedings IEEE International Symposium on Circuits and Systems
ISSN
0271-4310
Publication Date
December 1, 1990
Volume
3
Start / End Page
1721 / 1723
Citation
APA
Chicago
ICMJE
MLA
NLM
Thomsen, A., & Brooke, M. A. (1990). A new structure for an analog divider. Proceedings IEEE International Symposium on Circuits and Systems, 3, 1721–1723.
Thomsen, A., and M. A. Brooke. “A new structure for an analog divider.” Proceedings IEEE International Symposium on Circuits and Systems 3 (December 1, 1990): 1721–23.
Thomsen A, Brooke MA. A new structure for an analog divider. Proceedings IEEE International Symposium on Circuits and Systems. 1990 Dec 1;3:1721–3.
Thomsen, A., and M. A. Brooke. “A new structure for an analog divider.” Proceedings IEEE International Symposium on Circuits and Systems, vol. 3, Dec. 1990, pp. 1721–23.
Thomsen A, Brooke MA. A new structure for an analog divider. Proceedings IEEE International Symposium on Circuits and Systems. 1990 Dec 1;3:1721–1723.
Published In
Proceedings IEEE International Symposium on Circuits and Systems
ISSN
0271-4310
Publication Date
December 1, 1990
Volume
3
Start / End Page
1721 / 1723