Measurement of the viscosity-density product using a quartz wedge
Publication
, Journal Article
Greenwood, MS; Adamson, JD; Bond, LJ
Published in: AIP Conference Proceedings
April 9, 2005
The on-line measurement of the viscosity-density product is accomplished by analyzing the multiple reflections of an ultrasonic shear horizontal (SH) wave within a quartz wedge. Many echoes are observed as the ultrasound is reflected from the two sides (inclined at a 70° angle) and the quartz-liquid interface at the base of the wedge. The analysis yields a very accurate measurement of the reflection coefficient. The measurement is self-calibrating because it is not affected by changes in the pulser voltage. © 2005 American Institute of Physics.
Duke Scholars
Published In
AIP Conference Proceedings
DOI
EISSN
1551-7616
ISSN
0094-243X
Publication Date
April 9, 2005
Volume
760
Start / End Page
1690 / 1697
Citation
APA
Chicago
ICMJE
MLA
NLM
Greenwood, M. S., Adamson, J. D., & Bond, L. J. (2005). Measurement of the viscosity-density product using a quartz wedge. AIP Conference Proceedings, 760, 1690–1697. https://doi.org/10.1063/1.1916874
Greenwood, M. S., J. D. Adamson, and L. J. Bond. “Measurement of the viscosity-density product using a quartz wedge.” AIP Conference Proceedings 760 (April 9, 2005): 1690–97. https://doi.org/10.1063/1.1916874.
Greenwood MS, Adamson JD, Bond LJ. Measurement of the viscosity-density product using a quartz wedge. AIP Conference Proceedings. 2005 Apr 9;760:1690–7.
Greenwood, M. S., et al. “Measurement of the viscosity-density product using a quartz wedge.” AIP Conference Proceedings, vol. 760, Apr. 2005, pp. 1690–97. Scopus, doi:10.1063/1.1916874.
Greenwood MS, Adamson JD, Bond LJ. Measurement of the viscosity-density product using a quartz wedge. AIP Conference Proceedings. 2005 Apr 9;760:1690–1697.
Published In
AIP Conference Proceedings
DOI
EISSN
1551-7616
ISSN
0094-243X
Publication Date
April 9, 2005
Volume
760
Start / End Page
1690 / 1697