Skip to main content
Journal cover image

Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection

Publication ,  Journal Article
Kurdi, MH; Schmitz, TL; Haftka, RT; Mann, BP
Published in: International Journal of Materials and Product Technology
January 1, 2009

Successful implementation of milling requires the selection of appropriate operating parameters. In this paper a semi-analytical modeling approach and multi-objective optimisation are used to select optimum spindle speed and axial depth. The trade-off curve of removal rate and surface location error is calculated. Some degree of robustness is achieved by calculating the surface location error as a moving average over an interval of spindle speeds. The stability boundary and a selected design are compared to experimental results. The results illustrate the need to be concerned with the robustness of the optimal designs. This is addressed in Part 2 of the paper. © 2009 Inderscience Enterprises Ltd.

Duke Scholars

Published In

International Journal of Materials and Product Technology

DOI

ISSN

0268-1900

Publication Date

January 1, 2009

Volume

35

Issue

1-2

Start / End Page

3 / 25

Related Subject Headings

  • Materials
  • 0913 Mechanical Engineering
  • 0912 Materials Engineering
  • 0910 Manufacturing Engineering
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Kurdi, M. H., Schmitz, T. L., Haftka, R. T., & Mann, B. P. (2009). Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection. International Journal of Materials and Product Technology, 35(1–2), 3–25. https://doi.org/10.1504/IJMPT.2009.025209
Kurdi, M. H., T. L. Schmitz, R. T. Haftka, and B. P. Mann. “Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection.” International Journal of Materials and Product Technology 35, no. 1–2 (January 1, 2009): 3–25. https://doi.org/10.1504/IJMPT.2009.025209.
Kurdi MH, Schmitz TL, Haftka RT, Mann BP. Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection. International Journal of Materials and Product Technology. 2009 Jan 1;35(1–2):3–25.
Kurdi, M. H., et al. “Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection.” International Journal of Materials and Product Technology, vol. 35, no. 1–2, Jan. 2009, pp. 3–25. Scopus, doi:10.1504/IJMPT.2009.025209.
Kurdi MH, Schmitz TL, Haftka RT, Mann BP. Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection. International Journal of Materials and Product Technology. 2009 Jan 1;35(1–2):3–25.
Journal cover image

Published In

International Journal of Materials and Product Technology

DOI

ISSN

0268-1900

Publication Date

January 1, 2009

Volume

35

Issue

1-2

Start / End Page

3 / 25

Related Subject Headings

  • Materials
  • 0913 Mechanical Engineering
  • 0912 Materials Engineering
  • 0910 Manufacturing Engineering