Skip to main content

Detailed Characterization of 2D and 3D Scatter-to-Primary Ratios of Various Breast Geometries Using a Dedicated CT Mammotomography System.

Publication ,  Journal Article
Shah, J; Pachon, JH; Madhav, P; Tornai, MP
Published in: Proc SPIE Int Soc Opt Eng
February 13, 2011

With a dedicated breast CT system using a quasi-monochromatic x-ray source and flat-panel digital detector, the 2D and 3D scatter to primary ratios (SPR) of various geometric phantoms having different densities were characterized in detail. Projections were acquired using geometric and anthropomorphic breast phantoms. Each phantom was filled with 700ml of 5 different water-methanol concentrations to simulate effective boundary densities of breast compositions from 100% glandular (1.0g/cm(3)) to 100% fat (0.79g/cm(3)). Projections were acquired with and without a beam stop array. For each projection, 2D scatter was determined by cubic spline interpolating the values behind the shadow of each beam stop through the object. Scatter-corrected projections were obtained by subtracting the scatter, and the 2D SPRs were obtained as a ratio of the scatter to scatter-corrected projections. Additionally the (un)corrected data were individually iteratively reconstructed. The (un)corrected 3D volumes were subsequently subtracted, and the 3D SPRs obtained from the ratio of the scatter volume-to-scatter-corrected (or primary) volume. Results show that the 2D SPR values peak in the center of the volumes, and were overall highest for the simulated 100% glandular composition. Consequently, scatter corrected reconstructions have visibly reduced cupping regardless of the phantom geometry, as well as more accurate linear attenuation coefficients. The corresponding 3D SPRs have increased central density, which reduces radially. Not surprisingly, for both 2D and 3D SPRs there was a dependency on both phantom geometry and object density on the measured SPR values, with geometry dominating for 3D SPRs. Overall, these results indicate the need for scatter correction given different geometries and breast densities that will be encountered with 3D cone beam breast CT.

Duke Scholars

Altmetric Attention Stats
Dimensions Citation Stats

Published In

Proc SPIE Int Soc Opt Eng

DOI

ISSN

0277-786X

Publication Date

February 13, 2011

Volume

7961

Issue

796158

Location

United States

Related Subject Headings

  • 5102 Atomic, molecular and optical physics
  • 4009 Electronics, sensors and digital hardware
  • 4006 Communications engineering
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Shah, J., Pachon, J. H., Madhav, P., & Tornai, M. P. (2011). Detailed Characterization of 2D and 3D Scatter-to-Primary Ratios of Various Breast Geometries Using a Dedicated CT Mammotomography System. Proc SPIE Int Soc Opt Eng, 7961(796158). https://doi.org/10.1117/12.878809
Shah, Jainil, Jan H. Pachon, Priti Madhav, and Martin P. Tornai. “Detailed Characterization of 2D and 3D Scatter-to-Primary Ratios of Various Breast Geometries Using a Dedicated CT Mammotomography System.Proc SPIE Int Soc Opt Eng 7961, no. 796158 (February 13, 2011). https://doi.org/10.1117/12.878809.
Shah J, Pachon JH, Madhav P, Tornai MP. Detailed Characterization of 2D and 3D Scatter-to-Primary Ratios of Various Breast Geometries Using a Dedicated CT Mammotomography System. Proc SPIE Int Soc Opt Eng. 2011 Feb 13;7961(796158).
Shah, Jainil, et al. “Detailed Characterization of 2D and 3D Scatter-to-Primary Ratios of Various Breast Geometries Using a Dedicated CT Mammotomography System.Proc SPIE Int Soc Opt Eng, vol. 7961, no. 796158, Feb. 2011. Pubmed, doi:10.1117/12.878809.
Shah J, Pachon JH, Madhav P, Tornai MP. Detailed Characterization of 2D and 3D Scatter-to-Primary Ratios of Various Breast Geometries Using a Dedicated CT Mammotomography System. Proc SPIE Int Soc Opt Eng. 2011 Feb 13;7961(796158).

Published In

Proc SPIE Int Soc Opt Eng

DOI

ISSN

0277-786X

Publication Date

February 13, 2011

Volume

7961

Issue

796158

Location

United States

Related Subject Headings

  • 5102 Atomic, molecular and optical physics
  • 4009 Electronics, sensors and digital hardware
  • 4006 Communications engineering