Skip to main content

SU‐FF‐T‐257: The Study of the Dosimetric Properties of ‘RadGel’, a New Dosimeter for Three‐Dimensional Gel Dosimetry

Publication ,  Conference
Guo, P; Appleby, A; Oldham, M
Published in: Medical Physics
January 1, 2005

Purpose: The development of advanced radiation treatment techniques such as IMRT has prompted an immediate need for a dosimetry system that can provide accurate and convenient measurement of complex three‐dimensional (3D) dose distributions. Gel dosimetry has proved a promising candidate, but present gel‐dosimeters are still not in widespread routine clinical use. In this work we investigate the dosimetric properties of a new 3D dosimetry material, RadGel™, which has potential for application in radiation therapy. Method and Materials: Samples of RadGel TM contained in optical cuvettes (1cm×1cm×5cm) were irradiated in a series of experiments to determine sensitivity to dose, dose rate, energy, and stability of response with time post‐irradiation. Pre and post irradiation measurements were made of the optical‐density profile along the long axis of the cuvettes using a custom laser scanning system at 632nm. The radiation induced spectral optical density (OD) change of RadGel™ was also measured by a conventional spectrophotometer. Results: The spectrophotometric measurements indicated that peak radiation induced OD change occurred at ∼600nm (FWHM ∼100nm). A linear relationship was observed between OD changes and dose, and negligible dependence on dose rate. OD measurements a week after irradiation revealed significant degradation of optical response compared with scans 24 h post irradiation, but the timescale of these changes is still much improved from existing non‐scattering 3D dosimetry materials. Conclusion: The RadGel™ material has several attractive qualities for 3D dosimetry. In particular RadGel™ is more robust than established non light‐scattering 3D dosimeters to exposure to air and water. Together with an improved stability of response with time RadGel™ appears a practical and convenient material. Further tests are required on larger volumes of RadGel™ to determine true potential. © 2005, American Association of Physicists in Medicine. All rights reserved.

Duke Scholars

Published In

Medical Physics

DOI

ISSN

0094-2405

Publication Date

January 1, 2005

Volume

32

Issue

6

Start / End Page

2009

Related Subject Headings

  • Nuclear Medicine & Medical Imaging
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
  • 1112 Oncology and Carcinogenesis
  • 0903 Biomedical Engineering
  • 0299 Other Physical Sciences
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Guo, P., Appleby, A., & Oldham, M. (2005). SU‐FF‐T‐257: The Study of the Dosimetric Properties of ‘RadGel’, a New Dosimeter for Three‐Dimensional Gel Dosimetry. In Medical Physics (Vol. 32, p. 2009). https://doi.org/10.1118/1.1997986
Guo, P., A. Appleby, and M. Oldham. “SU‐FF‐T‐257: The Study of the Dosimetric Properties of ‘RadGel’, a New Dosimeter for Three‐Dimensional Gel Dosimetry.” In Medical Physics, 32:2009, 2005. https://doi.org/10.1118/1.1997986.
Guo, P., et al. “SU‐FF‐T‐257: The Study of the Dosimetric Properties of ‘RadGel’, a New Dosimeter for Three‐Dimensional Gel Dosimetry.” Medical Physics, vol. 32, no. 6, 2005, p. 2009. Scopus, doi:10.1118/1.1997986.

Published In

Medical Physics

DOI

ISSN

0094-2405

Publication Date

January 1, 2005

Volume

32

Issue

6

Start / End Page

2009

Related Subject Headings

  • Nuclear Medicine & Medical Imaging
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
  • 1112 Oncology and Carcinogenesis
  • 0903 Biomedical Engineering
  • 0299 Other Physical Sciences