Skip to main content

SU‐FF‐T‐221: Evaluation of An Electron Monte Carlo Dose Calculation Algorithm for Electron Beam Radiotherapy

Publication ,  Conference
hu, A; Song, H; Chen, Z; Zhou, S; Yin, F
Published in: Medical Physics
January 1, 2006

Purpose: To systematically evaluate the electron Monte Carlo (eMC) dose calculation algorithm of the Eclipse treatment planning system and to identify factors that affect its calculation accuracy. Method and Materials: Percent depth dose (PDD) and profiles for each electron energy/applicator/depth combination were measured for four Varian Clinac 21EX Linacs. Cutout factors for various cutout sizes down to 3×3 cm2 were also measured. Statistical comparison between eMC calculation and measurement was performed for parameters such as shift in depth of PDD curves, field size, penumbra width, average dose difference within 80% of field size, beam symmetry, Bremsstrahlung dose, and cutout factor. Analysis of variance was used to identify factors that have significant influence on the observed discrepancies. Results: The agreement between measured and calculated 50% PDD depth was within ±2 mm for nearly all machine/energy/applicator combinations except the 6×6 6 MeV beams on three machines where maximum difference was 3.8 mm. The calculated field width was larger than that of measured in most of the cases but within 3%. The differences between calculated and measured penumbra were also within 3%. The calculated Bremsstrahlung doses were smaller than measurements, with a few exceptions. Analysis of variance identified machine as a significant variable for the observed discrepancies in PDD, field width, and penumbra, suggesting possible variations among linacs or the quality of measured data. Calculation grid size was found to have significant effect on calculation accuracy. Using grid size of 5 mm resulted in approximate 10% discrepancies. Reducing grid size yielded significant improvement on the calculated cutout factor: from 5% discrepancy to less than 3% when grid size of 1 mm was used. Conclusion: The overall agreement between the eMC calculation and measurements was acceptable. Calculation grid size of 2.5 mm or smaller is recommended for all field sizes for eMC algorithm. © 2006, American Association of Physicists in Medicine. All rights reserved.

Duke Scholars

Published In

Medical Physics

DOI

ISSN

0094-2405

Publication Date

January 1, 2006

Volume

33

Issue

6

Start / End Page

2099

Related Subject Headings

  • Nuclear Medicine & Medical Imaging
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
  • 1112 Oncology and Carcinogenesis
  • 0903 Biomedical Engineering
  • 0299 Other Physical Sciences
 

Citation

APA
Chicago
ICMJE
MLA
NLM
hu, A., Song, H., Chen, Z., Zhou, S., & Yin, F. (2006). SU‐FF‐T‐221: Evaluation of An Electron Monte Carlo Dose Calculation Algorithm for Electron Beam Radiotherapy. In Medical Physics (Vol. 33, p. 2099). https://doi.org/10.1118/1.2241141
hu, A., H. Song, Z. Chen, S. Zhou, and F. Yin. “SU‐FF‐T‐221: Evaluation of An Electron Monte Carlo Dose Calculation Algorithm for Electron Beam Radiotherapy.” In Medical Physics, 33:2099, 2006. https://doi.org/10.1118/1.2241141.
hu, A., et al. “SU‐FF‐T‐221: Evaluation of An Electron Monte Carlo Dose Calculation Algorithm for Electron Beam Radiotherapy.” Medical Physics, vol. 33, no. 6, 2006, p. 2099. Scopus, doi:10.1118/1.2241141.

Published In

Medical Physics

DOI

ISSN

0094-2405

Publication Date

January 1, 2006

Volume

33

Issue

6

Start / End Page

2099

Related Subject Headings

  • Nuclear Medicine & Medical Imaging
  • 5105 Medical and biological physics
  • 4003 Biomedical engineering
  • 1112 Oncology and Carcinogenesis
  • 0903 Biomedical Engineering
  • 0299 Other Physical Sciences