Materials

• 

  Subject Areas on Research

  • "Controlled Growth of Long GaN Nanowires from Catalyst Patterns Fabricated by "Dip-Pen" Nanolithographic Techniques" 
  • 12% Efficiency CuIn(Se,S)2 photovoltaic device prepared using a hydrazine solution process 
  • 3D Printing of Polytetrafluoroethylene Hollow Needles for Medical Applications 
  • 3D nanostructured multilayer Si/Al film with excellent cycle performance as anode material for lithium-ion battery 
  • A Generalized System for Photo-Responsive Membrane Rupture in Polymersomes. 
  • A Robust Ion-Conductive Biopolymer as a Binder for Si Anodes of Lithium-Ion Batteries 
  • A Simplified Multivariant SMA Model Based on Invariant Plane Nature of Martensitic Transformation 
  • A Synthetic Hydrogel Composite with a Strength and Wear Resistance Greater than Cartilage 
  • A Synthetic Hydrogel Composite with the Mechanical Behavior and Durability of Cartilage 
  • A Versatile Thin-Film Deposition Method for Multidimensional Semiconducting Bismuth Halides 
  • A computational high-throughput search for new ternary superalloys 
  • A damage evolution model for viscoelastic composite laminates 
  • A jelly-roll process for high temperature superconducting tapes and wires 
  • A lattice parameter method for the investigation of solid state precipitation 
  • A method to obtain a Ragone plot for evaluation of carbon nanotube supercapacitor electrodes 
  • A methodology for predicting variability in microstructurally short fatigue crack growth rates 
  • A micromechanical analysis of a local failure criterion for particle-reinforced composites 
  • A micromechanical analysis of the coupled thermomechanical superelastic response of textured and untextured polycrystalline NiTi shape memory alloys 
  • A new source of X-ray line broadening: inhomogeneous strains induced by uniform homogeneous temperature conditions in polyphase or non-cubic materials 
  • A new source of X-ray line broadening: inhomogeneous strains induced by uniform homogeneous temperature conditions in polyphase or non-cubic materials 
  • A numerical study of the coupling of elastic and transformation fields in pore arrays in shape memory alloy plates to advance porous structure design and optimization 
  • A remotely driven and controlled micro-gripper fabricated from light-induced deformation smart material 
  • A study of the natural modes of vibration and aeroelastic stability of a plate with a piezoelectric material 
  • AFLOW-ML: A RESTful API for machine-learning predictions of materials properties 
  • AFLOWπ: A minimalist approach to high-throughput ab initio calculations including the generation of tight-binding hamiltonians 
  • AFLUX: The LUX materials search API for the AFLOW data repositories 
  • Ab initio lattice stability in comparison with CALPHAD lattice stability 
  • Accuracy of ab initio methods in predicting the crystal structures of metals: A review of 80 binary alloys 
  • Advanced modeling of materials with PAOFLOW 2.0: New features and software design 
  • Algebra for online analytical processing data cube 
  • Aligned Single-Walled Carbon Nanotube Arrays from Rhodium Catalysts with Unexpected Diameter Uniformity Independent of the Catalyst Size and Growth Temperature 
  • Alloying and Defect Control within Chalcogenide Perovskites for Optimized Photovoltaic Application 
  • Amino-Functionalized Carbon Nanotubes for Binding to Polymers and Biological Systems 
  • An X-ray study of ionic carbide solid solubilities 
  • An electrochemical method for the extraction of precipitates from age-hardenable aluminium alloys 
  • An x-ray investigation of precipitation effects in brass containing nickel and aluminum 
  • Analysis of Controlled Beam Deflections Using SMA Wires 
  • Analysis of variable stress history on polymeric composite materials with physical aging 
  • Analytically describing the temperature-dependent constitutive parameters of an electromagnetic metamaterial 
  • Anisotropic Metallic Microlattice Structures for Underwater Operations 
  • Anisotropic Structural Collapse of Mg3Sb2and Mg3Bi2at High Pressure 
  • Anomalously low electronic thermal conductivity in metallic vanadium dioxide. 
  • Appearances of grain in semi-solid slurry prepared by mechanical stirring 
  • Approach toward high efficiency CdTe/CdS heterojunction solar cells 
  • Aqueous Synthesis of Water-Soluble Alumoxanes: Environmentally Benign Precursors to Alumina and Aluminum-Based Ceramics 
  • Atomic modelling of homogeneous nucleation of dislocations from condensation of point defects in silicon 
  • Atomistic characterization of pseudoelasticity and shape memory in NiTi nanopillars 
  • Atomistic simulations of the yielding of gold nanowires 
  • BaCu2Sn(S,Se)4: Earth-abundant chalcogenides for thin-film photovoltaics 
  • Band Gap Tailoring and Structure-Composition Relationship within the Alloyed Semiconductor Cu2BaGe1- xSnxSe4 
  • Bending and tensile deformation of metallic nanowires 
  • Bioinspired reversibly cross-linked hydrogels comprising polypeptide micelles exhibit enhanced mechanical properties 
  • Biomimetics: Platelet-Inspired Nanocells for Targeted Heart Repair After Ischemia/Reperfusion Injury (Adv. Funct. Mater. 4/2019) 
  • Boro/carbothermal reduction co-synthesis of dual-phase high-entropy boride-carbide ceramics 
  • Bromide Causes Facet-Selective Atomic Addition in Gold Nanorod Syntheses 
  • Calculation of solubility in titanium alloys from first principles 
  • Carbon Fiber Reinforced Shape Memory Polymer Composites 
  • Carbon diffusion in lanthanum erbium carbide stabilized in the cubic fluorite structure 
  • Carbon fiber reinforced shape memory polymer composites 
  • Carbon stoichiometry and mechanical properties of high entropy carbides 
  • Cast NiTi shape-memory alloys 
  • Casting Fluidity of Mg-xGd-1Er-0.5Zr Alloy 
  • Characterization of diamond thin films: Diamond phase identification, surface morphology, and defect structures 
  • Characterization of fracture toughness of renal calculi using a microindentation technique 
  • Chemical pressure analysis (CPA): yttrium, bismuth, thallium, and mercury based high-temperature superconductors 
  • Chemical pressure analysis of high temperature superconductors: Anisotropic effects in YBa2Cu3O7-x and YBa2(Cu1-yFey)3O7-x  
  • Chemical pressure analysis of high temperature superconductors: Anisotropic effects in YBa₂ Cu₃ O_7-x and YBa₂ (Cu_1-y Fe_y )₃ O_7-x  
  • Chitosan-Based Scaffolds for Hepatocyte Culture 
  • Clathrate BaNi2P4: An Interplay of Heat and Charge Transport Due to Strong Host-Guest Interactions 
  • Coherent Phonon-Induced Modulation of Charge Transfer in 2D Hybrid Perovskites 
  • Combination of enhanced thermal conductivity and strength of MWCNTs reinforced Mg-6Zn matrix composite 
  • Combined hardening of composite materials based on aluminum 
  • Comment on: A Correction to the Brinson's Evolution Kinetics for Shape Memory Alloys 
  • Comparison of AlGaN and GaN grown on various substrates: Step flow growth on LiGaO2 at low growth temperature 
  • Comparison of AlGaN and GaN grown on various substrates: Step flow growth on LiGaO₂ at low growth temperature 
  • Comparison of micromechanics methods for effective properties of multiphase viscoelastic composites 
  • Compelling mechanical properties of carbon nanotubes reinforced pure magnesium composite by effective interface bonding of Mg2Ni 
  • Compressive response of NiTi single crystals 
  • Compressive response of NiTi single crystals, by H. Sehitoglu, I. Karaman, R. Anderson, X. Zhang, K. Gall, H.J. Maier and Y. Chumlyakov, originally published in Acta Materialia, Volume 48(13), pp. 3311–3326, 2000 
  • Computational and experimental analysis of fusion bonding in thermoplastic composites: Influence of process parameters 
  • Computational crystal structure prediction with high-through-put Ab initio and data mining methods 
  • Controlling Bulk Optical Properties of Emissive Polymersomes Through Intramembranous Polymer-Fluorophore Interactions. 
  • Controlling polarization dependent reactions to fabricate multi-component functional nanostructures 
  • Conventional and novel fabrication of magnesium matrix composites 
  • Correction: Programmable Acoustic Metasurfaces (Advanced Functional Materials, (2019), 29, (1808489), 10.1002/adfm.201808489) 
  • Covalent Bond Scission in the Mullins Effect of a Filled Elastomer: Real-Time Visualization with Mechanoluminescence 
  • Creep Resistance of As-extruded Mg-8Gd-1Er-0.5Zr Alloy 
  • Creep and Physical Aging in a Polymeric Composite: Comparison of Tension and Compression 
  • Creep mechanism of as-cast Mg-6Al-6Nd alloy 
  • Creep of thin film Au on bimaterial Au/Si microcantilevers 
  • Creep properties and controlled creep mechanism of as-cast Mg-5Zn-2.5Er alloy 
  • Crystallization behavior upon heating and cooling in Cu50Zr50 metallic glass thin films 
  • Crystallization of amorphous SiO2 microtubes catalyzed by lithium 
  • Crystallization temperature investigation of Cu2ZnSnS4 by using Differential scanning calorimetry (DSC) 
  • Current and potential future research activities in adaptive structures: An ARO perspective 
  • Cyclic deformation behavior of single crystal NiTi 
  • Cyclic deformation mechanisms in precipitated NiTi shape memory alloys 
  • DIAMOND NUCLEATION AND GROWTH ON REACTIVE TRANSITION-METAL SUBSTRATES 
  • Damage sensing using a mechanophore crosslinked epoxy resin in single-fiber composites 
  • Deep Learning the Electromagnetic Properties of Metamaterials—A Comprehensive Review 
  • Defect and interface structures of diamond thin films 
  • Deformation limits in shape-memory polymers 
  • Deformation of Crystals: Connections with Statistical Physics 
  • Deformation of Shape Memory Alloys Due to Thermo-Induced Transformation 
  • Deformation of single crystal hadfield steel by twinning and slip 
  • Deformation of top-down and bottom-up silver nanowires 
  • Delivery of iPS-NPCs to the Stroke Cavity within a Hyaluronic Acid Matrix Promotes the Differentiation of Transplanted Cells 
  • Density functional study of the L10-αIrV transition in IrV and RhV 
  • Design and experimental characterization of an electromagnetic transducer for large-scale vibratory energy harvesting applications 
  • Design method for high-force electrorheological dampers 
  • Detwinning in NiTi alloys 
  • Development and characterization of healable carbon fiber composites with a reversibly cross linked polymer 
  • Diamond nucleation on nickel substrates seeded with non-diamond carbon 
  • Diffusion in GaAs and related compounds: Recent developments 
  • Diffusion-limited etching of p-GaAs in NaOHNa2EDTA solutions 
  • Direct coating ZnO nanocrystals onto 1D Fe3O4/C composite microrods as highly efficient and reusable photocatalysts for water treatment 
  • Dual phases strengthening behavior of Mg–10Gd–1Er–1Zn–0.6Zr alloy 
  • Dynamic Electromechanical Hydrogel Matrices for Stem Cell Culture. 
  • Dynamic characteristics of double-helical planetary gear sets under time-varying mesh stiffness 
  • Dynamic electromagnetic metamaterials 
  • Edge‐Defined Film‐Fed Growth of β‐Alumina and Mg‐Substituted β‐Alumina 
  • Effect of 3 d Transition Metal Doping on Multiferroic Properties of Bi0.8Ba0.2FeO3 Ceramics 
  • Effect of Gd on microstructure and corrosion behavior of Mg-xGd-1Er-1Zn-0.6Zr alloys 
  • Effect of Substrate Orientation on Interfacial and Bulk Character of Chemically Vapor Deposited Monocrystalline Silicon Carbide Thin Films 
  • Effect of Zn addition on microstructure and mechanical properties of as-cast Mg-2Er alloy 
  • Effect of Zn/Er ratio on microstructures and mechanical properties of the cast Mg-Zn-Er alloys 
  • Effect of Zn/Er weight ratio on phase formation and mechanical properties of as-cast Mg-Zn-Er alloys 
  • Effect of aging on microstructure of Mg-Zn-Er alloys 
  • Effect of an interphase region on debonding of a CNT reinforced polymer composite 
  • Effect of film chemistry on refractive index of plasma-enhanced chemical vapor deposited silicon oxynitride films: A correlative study 
  • Effect of machined feature size relative to the microstructural size on the superelastic performance in polycrystalline NiTi shape memory alloys 
  • Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys 
  • Effect of pre-solution treatment on mechanical properties of as-extruded Mg96.9Zn0.43Gd2.48Zr0.15 alloy 
  • Effect of temperature on microstructure and texture evolution of Mg-Zn-Er alloy during hot compression 
  • Effect of thermal annealing on the optical and morphological properties of (AETH)PbX4 (X = Br, I) perovskite films prepared using single source thermal ablation 
  • Effective dispersion of CNTs to fabricate CNT/Mg nanocomposite 
  • Effects of Cooling Rate on Solidified Microstructure of Mg-8Gd-1Er Alloy 
  • Effects of Nd on tensile properties of Mg-6Al as-cast alloy 
  • Effects of Pore Morphology and Bone Ingrowth on Mechanical Properties of Microporous Titanium as an Orthopaedic Implant Material 
  • Effects of carbon nanotubes on twin and texture evolution of magnesium matrix composite during compression process 
  • Effects of dispersion and interfacial modification on the macroscale properties of TiO(2) polymer matrix nanocomposites. 
  • Effects of grain refinement methods on microstructure and mechanical properties of AM60 magnesium alloys 
  • Effects of melt temperature on microstructure and properties of Mg-Zn-Er alloy with ultrasonic treatment 
  • Effects of p-type dopants on enhancing AlAs/GaAs superlattice disordering 
  • Effects of repeated plastic working(RPW) on microstructure and mechanical properties of Mg2Si/Mg-5Zn-2. 5Er composites 
  • Effects of secondary phases on texture and mechanical properties of as-extruded Mg–Zn–Er alloys 
  • Effects of the organic additives on dental zirconia ceramics: structural and mechanical properties 
  • Effects of ultrasonic treatment on microstructure and mechanical properties of Mg-5Zn-2Er alloy 
  • Effects of ultrasonic treatment on microstructure and properties of AZ31 magnesium alloy 
  • Electrically Tunable Surface Acoustic Wave Propagation at MHz Frequencies Based on Carbon Nanotube Thin-Film Transistors 
  • Electrically coupling complex oxides to semiconductors: A route to novel material functionalities 
  • Electroluminescence from an organic-inorganic perovskite incorporating a quaterthiophene dye within lead halide perovskite layers 
  • Electron Microscopy of Defects in Epitaxical β‐SiC Thin Films Grown on Silicon and Carbon {0001} Faces of α‐SiC Substrates 
  • Electron Microscopy of Vapor Phase Deposited Diamond 
  • Electron microscopic characterization of diamond films grown on Si by bias-controlled chemical vapor deposition 
  • Electrospinning preparation of Sn⁴⁺ -doped BiFeO3 nanofibers as efficient visible-light-driven photocatalyst for O2 evolution 
  • Elevated-temperature behavior of fe3al with chromium additions 
  • Encapsulating a Hydrophilic Chemotherapeutic into Rod-like Nanoparticles of a Genetically Encoded Asymmetric Triblock Polypeptide Improves its Efficacy. 
  • Environmentally influenced microstructurally small fatigue crack growth in cast magnesium 
  • Epitaxial Oxides on Semiconductors: From Fundamentals to New Devices 
  • Erratum: Development and characterization of healable carbon fiber composites with a reversibly cross linked polymer (Journal of Composite Materials 44:13 (1587-1603)) 
  • Erratum: Structural tolerance factor approach to defect-resistant I2‑II-IV‑X4 semiconductor design (Chemistry of Materials (2020) 32:4 (1636-1649) DOI: 10.1021/acs.chemmater.9b05107) 
  • Evaluation of the tantalum-titanium phase diagram from ab-initio calculations 
  • Evolution of Phase Strains During Tensile Loading of Bovine Cortical Bone 
  • Extraction and X-ray analysis of phases in aluminium alloys 
  • FEM study of fatigue crack closure under double slip 
  • Fabrication and Properties of Magnesium Alloy Microtubes for Vascular Stent 
  • Fabrication of Multifaceted Micropatterned Surfaces with Laser Scanning Lithography. 
  • Fabrication of activated carbon fibers/carbon aerogels composites by gelation and supercritical drying in isopropanol 
  • Fabrication of biofunctionalized quasi-three-dimensional microstructures of a nonfouling comb polymer using soft lithography 
  • Facile formation of Ag2WO4/AgX (X = Cl, Br, I) hybrid nanorods with enhanced visible-light-driven photoelectrochemical properties 
  • Facile in situ fabrication of Co nanoparticles embedded in 3D N-enriched mesoporous carbon foam electrocatalyst with enhanced activity and stability toward oxygen reduction reaction 
  • Facile preparation of ternary Ag2CO3/Ag/PANI composite nanorods with enhanced photoactivity and stability 
  • Facile synthesis of porous Bi2O3-BiVO4p-n heterojunction composite microrods with highly efficient photocatalytic degradation of phenol 
  • Failure mechanism of as-cast Mg-6Zn-2Er alloy during tensile test at room temperature 
  • Fe3O4 stabilized zirconia: structural, mechanical and optical properties 
  • Fiber waviness in nanotube-reinforced polymer composites—I: Modulus predictions using effective nanotube properties 
  • Fiber waviness in nanotube-reinforced polymer composites—II: modeling via numerical approximation of the dilute strain concentration tensor 
  • Finite Element Analysis of Adaptive-Stiffening and Shape-Control SMA Hybrid Composites 
  • First-principle investigation on multiferroicity in cubic perovskite LaMn3Fe4O12 compound 
  • Formation of Plasma Polymer Thin Films Containing Reactive Metal Chelate Sites 
  • Formation of novel photoluminescent hybrid materials by sequential vapor infiltration into polyethylene terephthalate fibers 
  • Fracture strength of human gallstones 
  • Fracture strength studies of renal calculi 
  • Free boundary effects and representative volume elements in 3D printed Ti-6Al-4V gyroid structures 
  • Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal 
  • Germanium selective solar absorber surfaces 
  • Grain refinement and mechanism of carbon inoculation in Mg-Al magnesium alloys 
  • Graphene as an Electron Shuttle for Silver Deoxidation: Removing a Key Barrier to Plasmonics and Metamaterials for SERS in the Visible 
  • Graphene as an electron shuttle for silver deoxidation: Removing a key barrier to plasmonics and metamaterials for sers in the visible 
  • Growth and characterization of ZnO single crystals with hydrous KOH melt method 
  • Growth and properties of Si-N-C-O nanocones and graphitic nanofibers synthesized using three-nanometer diameter iron/platinum nanoparticle-catalyst 
  • Growth rate, surface morphology, and defect microstructures of β—SiC films chemically vapor deposited on 6H—SiC substrates 
  • Guidelines for low-transmissibility semi-active vibration isolation 
  • Hafnium binary alloys from experiments and first principles 
  • Heterogeneity and inelasticity of deformation in a notched martensitic NiTi shape memory alloy specimen 
  • High cycle fatigue of a die cast AZ91E-T4 magnesium alloy 
  • High throughput combinatorial method for fast and robust prediction of lattice thermal conductivity 
  • High-Nanofiller-Content Graphene Oxide-Polymer Nanocomposites via Vacuum-Assisted Self-Assembly 
  • High-Strength Composites Based on 3D Printed Porous Scaffolds Infused with a Bioresorbable Mineral–Organic Bone Adhesive 
  • High-quality single-walled carbon nanotubes with small diameter, controlled density, and ordered locations using a polyferrocenylsilane block copolymer catalyst precursor 
  • High-strain shape-memory polymers 
  • High-throughput ab initio analysis of the Bi-In, Bi-Mg, Bi-Sb, In-Mg, In-Sb, and Mg-Sb systems 
  • High-throughput electronic band structure calculations: Challenges and tools 
  • High-throughput prediction of finite-temperature properties using the quasi-harmonic approximation 
  • Hot deformation behaviors and processing maps of Mg–Zn–Er alloys based on Gleeble–1500 hot compression simulation 
  • Hot spot-localized artificial antibodies for label-free plasmonic biosensing 
  • How Chemical Composition Alone Can Predict Vibrational Free Energies and Entropies of Solids 
  • Hydrazine-processed Ge-substituted CZTSe solar cells 
  • I2-II-IV-VI4 (I = Cu, Ag; II = Sr, Ba; IV = Ge, Sn; VI = S, Se): Chalcogenides for Thin-Film Photovoltaics 
  • Icosahedral quasicrystalline phase in an as-cast Mg-Zn-Er alloy 
  • Identifying interphase properties in polymer nanocomposites using adaptive optimization 
  • Impact of Morphology on Printed Contact Performance in Carbon Nanotube Thin-Film Transistors 
  • Improved structural quality and carrier decay times in GaN epitaxy on SiN and TiN porous network templates 
  • Improved uniformity and selected area deposition of diamond by the oxy-acetylene flame method 
  • In Situ Thermal Synthesis of Inlaid Ultrathin MoS2/Graphene Nanosheets as Electrocatalysts for the Hydrogen Evolution Reaction 
  • In situ growth rate measurement and nucleation enhancement for microwave plasma CVD of diamond 
  • In situ imaging of high cycle fatigue crack growth in single crystal nickel-base superalloys by synchrotron X-radiation 
  • In-Situ Observations of Low-Cycle Fatigue Damage in Cast AM60B Magnesium in an Environmental Scanning Electron Microscope 
  • In-situ studies on short crack growth in cast AM60B magnesium 
  • In-situ studies on short crack growth in cast AM60B magnesium 
  • In-situ, microscale characterization of heterogeneous deformation around notch in martensitic Shape Memory Alloy 
  • Incipient yielding behavior during indentation for gold thin films before and after annealing 
  • Increasing viability of nonlinear energy harvesters by adding an excited dynamic magnifier 
  • Influence of Annealing and Composition on the Crystal Structure of Mixed-Halide, Ruddlesden-Popper Perovskites 
  • Influence of deposition parameters on the composition and structure of reactively sputtered nanocomposite TaC/a-C:H thin films 
  • Infrared reflective property of AZO films prepared by RF magnetron sputtering 
  • Inkjet printing of amphotericin B onto biodegradable microneedles using piezoelectric inkjet printing 
  • Innovations Toward the Valorization of Plastics Waste 
  • Instrumented micro-indentation of NiTi shape-memory alloys 
  • Instrumented microindentation of nanoporous alumina films 
  • Integration of basic materials research into the design of cast components by a multi-scale methodology 
  • Integration of self-assembled microvascular networks with microfabricated PEG-based hydrogels 
  • Interfacial and Substrate Effects on Local Elastic Properties of Polymers Using Coupled Experiments and Modeling of Nanoindentation 
  • Intrinsic stress development and microstructure evolution of Au/Cr/Si multilayer thin films subject to annealing 
  • Investigation of doping effect on electrical leakage behavior of BiFeO3ceramics 
  • Investigation of the low angle grain boundaries in highly oriented diamond films via transmission electron microscopy 
  • Investigation on a new multiferroic compound KBiFe2O5: Structural, optical, electrical and magnetic properties 
  • Investigations on hot cracking susceptibility of Mg-xGd-1Er-0.5Zr alloys 
  • Iron nanoparticles derived from iron-complexed polymethylglutarimide to produce high-quality lithographically defined single-walled carbon nanotubes 
  • Isotropic Iodide Adsorption Causes Anisotropic Growth of Copper Microplates 
  • LARGE-SCALE SPACE ENGINEERING. 
  • Large-scale Space Engineering 
  • Laser reflectogram method for the study of crystal surfaces and epitaxial deposits 
  • Linear-scaling quantum mechanical calculations of biological molecules: The divide-and-conquer approach 
  • Living Yeast Cells as a Controllable Biosynthesizer for Fluorescent Quantum Dots 
  • Local and global strains and strain ratios in shape memory alloys using digital imagecorrelation 
  • Localized and Diffuse Thermoinduced Phase Transformation in 1-D Shape Memory Alloys 
  • Long-term durability of fiber-reinforced polymer-matrix composite materials for infrastructure applications: A review 
  • Long-term durability of glass-fiber reinforced composites in infrastructure applications 
  • Low temperature crystallization of glasses in the H2O-NaCl-dimethyl sulphoxide ternary system 
  • Low thermal conductivity carbon fibrous composite nanomaterial enabled by multi-scale porous structure 
  • Low-temperature melt processing of organic-inorganic hybrid films 
  • Magnesium alloy beam-barrel parts in direct squeezing casting 
  • Magnetically driven phonon instability enables the metal–insulator transition in h-FeS 
  • Magnetophoretic Conductors and Diodes in a 3D Magnetic Field. 
  • Manipulating the motion of gold aggregates using stimulus-responsive patterned polymer brushes as a motor 
  • Mapping single-crystal dendritic microstructure and defects in nickel-base superalloys with synchrotron radiation 
  • Materials cartography: Representing and mining materials space using structural and electronic fingerprints 
  • Materials for non-viral gene delivery 
  • Measurement of the critical aspect ratio and interfacial shear strength in MWNT/polymer composites 
  • Mechanical Properties and Growth Mechanism of TiB2-TiC/Fe Composite Coating Fabricated in Situ by Laser Cladding 
  • Mechanical properties and ageing response of the Mg-6Zn-1Er alloy produced by a new method of RPW process 
  • Mechanical properties and corrosion behaviors of Mg−4Zn−0.2Mn−0.2Ca alloy after long term in vitro degradation 
  • Mechanical properties of carbon nanotubes reinforced az91 composites by enhanced interfacial bonding 
  • Mechanical property development in reactively sputtered tantalum carbide/amorphous hydrocarbon thin films 
  • Mechanical response of linear viscoelastic composite laminates incorporating non-isothermal physical aging effects 
  • Mechanism responsible for dynamic recrystallization for repeated plastic working deformation process 
  • Melt Processing of Hybrid Organic-Inorganic Lead Iodide Layered Perovskites 
  • Metal-Organic Framework Encapsulation for Biospecimen Preservation 
  • Metallic glasses for biodegradable implants 
  • Method of obtaining gallium from aluminate solution by electrolysis 
  • Micro and Macromechanical Investigations of CuAlNi Single Crystal and CuAlMnZn Polycrystalline Shape Memory Alloys 
  • Micro and macro deformation of single crystal NiTi 
  • Microhardness studies of renal calculi 
  • Microscopic approaches to dynamics and structure of biological motors 
  • Microstructural control and hardening response of Mg–6Zn–0.5Er–0.5Ca alloy 
  • Microstructural inclusion influence on fatigue of a cast A356 aluminum alloy 
  • Microstructural optimization of a functionally gradient layer 
  • Microstructure and corrosion behaviors of as-rolled Mg-Zn-Er alloy sheets 
  • Microstructure and creep behaviors of as-cast Mg-Zn-Er alloys 
  • Microstructure and electrochemical properties of La0.8–xMMxMg0.2Ni3.1Co0.3Al0.1 (x = 0, 0.1, 0.2, 0.3) alloys 
  • Microstructure and formability at room temperature of as-annealing Mg-xZn-0.5Er alloy sheets 
  • Microstructure and fracture behavior of in-situ synthesized Mg2Si/Mg-2Al-Zn-2Gd composite 
  • Microstructure and mechanical properties of AZ31 magnesium alloy reinforced by I-phase 
  • Microstructure and mechanical properties of as-cast quasibinary NiTi–Nb eutectic alloy 
  • Microstructure and mechanical properties of extruded Mg-6Zn-xEr alloys 
  • Microstructure and mechanical properties of quasicrystal reinforced magnesium matrix composites 
  • Microstructure and properties of nano-SiC particle reinforced AMSO magnesium alloy 
  • Microstructure and strengthening mechanisms of Mg-6Al-6Nd alloy 
  • Microstructure evolution and mechanical properties of Mg-3Zn-0.5Er-0.5Al alloy 
  • Microstructure evolution and mechanical properties of extruded Mg-12Zn-1.5Er alloy 
  • Microstructure evolution of Mg-9Gd-2Er-0.4Zr alloy during solid solution treatment 
  • Microstructure evolution of the Mg-3Zn-0.5Er alloy during hot rolling 
  • Microstructure evolutions of Mg-8Gd-2Er (wt.%) alloy during isothermal ageing at 200 °c 
  • Microstructure, mechanical properties and stretch formability of as-rolled Mg alloys with Zn and Er additions 
  • Microstructure, tensile properties and creep behaviors of as-cast Mg-2Al-1Zn-xGd (x = 1, 2, 3, and 4 wt.%) alloys 
  • Microstructure, texture and mechanical properties of Mg-Zn-Er alloys containing I-phase and W-phase simultaneously 
  • Microstructure, texture and mechanical properties of as-extruded Mg-Zn-Er alloys 
  • Microstructure, texture and mechanical properties of as-extruded Mg-Zn-Er alloys containing W-phase 
  • Microstructures and mechanical properties of Mg-6Gd-1Er-0.5Zr alloy sheets produced with different rolling temperatures 
  • Microstructures and mechanical properties of homogenization and isothermal aging Mg–Gd–Er–Zn–Zr alloy 
  • Microstructures and mechanical properties of quasicrystal reinforced AZ31 matrix composites 
  • Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection 
  • Milling optimisation of removal rate and accuracy with uncertainty: Part 2: Parameter variation 
  • Mimicking mussel adhesion to improve interfacial properties in composites. 
  • Model and Simulation of an SMA Enhanced Lip Seal 
  • Modeling magneto-mechanical behavior of Fe3O4 nanoparticle/polyamide nanocomposite membrane in an external magnetic field 
  • Modeling off-stoichiometry materials with a high-throughput ab-initio approach 
  • Modulating the Growth Rate, Aspect Ratio, and Yield of Copper Nanowires with Alkylamines 
  • Modulation of dark conductivity over a 1 × 10^-12 to 1 × 10^-5 S/cm range through ancillary group modification in amorphous solids of ethyne-bridged (porphinato)zinc(II) oligomers 
  • Molecular dynamics simulations of the shape-memory behaviour of polyisoprene 
  • Molecularly Tailored Interface for Long-Term Xenogeneic Cell Transplantation 
  • Multi-duct ER dampers 
  • Multi-scale reinforcement of CFRPs using carbon nanofibers 
  • Multiscale modelling of the composite reinforced foam core of a 3D sandwich structure 
  • Multiscale structure and properties of cast and deformation processed polycrystalline NiTi shape-memory alloys 
  • Multiscale, multiphysics geomechanics for geodynamics applied to buckling instabilities in the middle of the Australian craton 
  • Nano-SiC particle reinforced AM60 magnesium alloy prepared by semi-solid process 
  • Nano-crystalline structure in Mg2Si/Mg-2.5Er-5Zn composite on the route of repeated plastic working process 
  • Nanofabrication with biomolecules 
  • Nanoscale structure and local mechanical properties of fiber-reinforced composites containing MWCNT-grafted hybrid glass fibers 
  • Nanoshell exogenous absorbers enable tissue welds 
  • Nanowires 
  • Negative refractive index metamaterials 
  • Neutron diffraction studies and multivariant simulations of shape memory alloys: Concurrent verification of texture development and mechanical response predictions 
  • Neutron diffraction studies and multivariant simulations of shape memory alloys: Empirical texture development–mechanical response relations of martensitic nickel–titanium 
  • NiTi with 3D-interconnected microchannels produced by liquid phase sintering and electrochemical dissolution of steel tubes 
  • Nitric Oxide Alleviates Oxidative Stress Caused by Lanthanum in Rice Leaves 
  • Nonlinear nonconservative behavior and modeling of piezoelectric energy harvesters including proof mass effects 
  • Nucleation and selected area deposition of diamond by biased hot filament chemical vapor deposition 
  • Nucleation of oriented diamond films on nickel substrates 
  • Observation of light-induced current from a porous silicon device 
  • Obtaining Ultra-High Strength and Ductility in a Mg–Gd–Er–Zn–Zr Alloy via Extrusion, Pre-deformation and Two-Stage Aging 
  • Off-Resonant Gold Superstructures as Ultrabright Minimally Invasive Surface-Enhanced Raman Scattering (SERS) Probes 
  • On the deformation mechanisms in single crystal hadfield manganese steels 
  • On the diamond-cubic to hexagonal phase transformation in silicon 
  • On the mechanical behavior of single crystal NiTi shape memory alloys and related polycrystalline phenomenon 
  • On the response sensitivity of an optimally designed functionally graded layer 
  • On the sensitivity of the design of composite sound absorbing structures 
  • Optimal FGMs, and plain awful composites 
  • Optimal performance of constrained control systems 
  • Optimization of CIGS-based PV device through antimony doping 
  • Optimization of active manganese oxide electrodeposits using graphenated carbon nanotube electrodes for supercapacitors 
  • Order in two-dimensional binary random arrays 
  • Ordering of rare gas films on a decagonal Al-Ni-Co quasicrystal 
  • Ordering of rare gas films on a decagonal Al-Ni-Co quasicrystal 
  • Oxidization thermo-dynamics of ignition-proof element and oxides properties in magnesium alloy 
  • PAOFLOW: A utility to construct and operate on ab initio Hamiltonians from the projections of electronic wavefunctions on atomic orbital bases, including characterization of topological materials 
  • Phase Stability, Band Gap Tuning, and Rashba Splitting in Selenium-Alloyed Bournonite: CuPbSb(S1- xSex)3 
  • Phase diagram based description of the hysteresis behavior of shape memory alloys 
  • Phase diagram kinetics for shape memory alloys: a robust finite element implementation 
  • Phase stability and mechanical properties of novel high entropy transition metal carbides 
  • Phase-Pure Hybrid Layered Lead Iodide Perovskite Films Based on a Two-Step Melt-Processing Approach 
  • Photocatalytic growth of copper nanowires from Cu2O seeds 
  • Photovoltaic Effect in Indium(I) Iodide Thin Films 
  • Plasma-Deposited Polymeric Films Prepared from Carbonyl-Containing Volatile Precursors: XPS Chemical Derivatization and Static SIMS Surface Characterization 
  • Plasmonic nanoparticle-based epoxy photocuring: A deeper look 
  • Plastic and transformation interactions of pores in shape memory alloy plates 
  • Plastic zones and fatigue-crack closure under plane-strain double slip 
  • Platelet-Inspired Nanocells for Targeted Heart Repair After Ischemia/Reperfusion Injury. 
  • Point defects and diffusion mechanisms pertinent to the Ga sublattice of GaAs 
  • Polymer nanocomposites: A small part of the story 
  • Porous shape-memory NiTi-Nb with microchannel arrays 
  • Precipitate strain relief via point defect interaction: models for SiO2 in silicon 
  • Precipitate strain relief via point defect interaction: models for SiO2 in silicon 
  • Precipitation behavior of 14H-LPSO structure in Mg–12Gd–2Er–1Zn–0.6Zr Alloy 
  • Precise oxygen evolution catalysts: Status and opportunities 
  • Preparation and Properties of (C₄ H₉ NH₃ )₂ EuI₄ : A Luminescent Organic-Inorganic Perovskite with a Divalent Rare-Earth Metal Halide Framework 
  • Preparation and properties of(C4H9NH3)(2)EUI4: A luminescent organic-inorganic perovskite with a divalent rare-earth metal halide framework 
  • Preparation of a Novel Gallium Arsenide Single-Source Precursor Having the Empirical Formula AsCl3Ga2 
  • Preparation of monodispersed Fe-Mo nanoparticles as the catalyst for CVD synthesis of carbon nanotubes 
  • Preparation of semi-solid slurry of AZ91D Mg alloy 
  • Preparation, Characterization and Facile Thermolysis of [X2GaP(SiMe3)2]2 (X = Br, I) and (Cl3Ga2P)n: New Precursors to Nanocrystalline Gallium Phosphide 
  • Programmable Acoustic Metasurfaces. 
  • Pseudoelastic cyclic stress-strain response of over-aged single crystal Ti-50.8at%Ni 
  • QH-POCC: Taming tiling entropy in thermal expansion calculations of disordered materials 
  • Quantum dot opto-electronic devices 
  • Rationally Designed Anisotropic and Auxetic Hydrogel Patches for Adaptation to Dynamic Organs 
  • Recent progresses on physics and applications of vanadium dioxide 
  • Recovering Nonisothermal Physical Aging Shift Factors Via Continuous Test Data: Theory and Experimental Results 
  • Reinforcement mechanisms in MWCNT-filled polycarbonate 
  • Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites 
  • Relationships between the thermal stability, friction, and wear properties of reactively sputtered Si-aC:H thin films 
  • Remarkably enhanced mechanical properties of Mg-8Gd-1Er-0.5Zr alloy on the route of extrusion, rolling and aging 
  • Remote activation of nanomagnetite reinforced shape memory polymer foam 
  • Reply to comments of F. F. Morehead 
  • Research on the Sol-Gel Method of Preparing Ternary Nano SiO₂-Al₂O₃-TiO₂ Materials 
  • Resolving rotational stacking disorder and electronic level alignment in a 2d oligothiophene-based lead iodide perovskite 
  • Rutile substructures in barium magnesium titanate 
  • Second-rank equilibrium and transport properties of fibrous composites: Effective predictions and bounds 
  • Shape memory and pseudoelastic behavior of 51.5%Ni-Ti single crystals in solutionized and overaged state 
  • Shape memory mechanics of an elastic memory composite resin 
  • Shape memory polymer nanocomposites 
  • Shape memory polymers for biomedical applications 
  • Shape memory polymers for medical applications 
  • SiC nanoparticles reinforced magnesium matrix composites fabricated by ultrasonic method 
  • Simplifications and Comparisons of Shape Memory Alloy Constitutive Models 
  • Simulation of interphase percolation and gradients in polymer nanocomposites 
  • Simulations of tensile failure in glassy polymers: effect of cross-link density 
  • SnI42--based hybrid perovskites templated by multiple organic cations: Combining organic functionalities through noncovalent interactions 
  • Solution-Processed Earth-Abundant Cu2BaSn(S,Se)4 Solar Absorber Using a Low-Toxicity Solvent 
  • Solution-Processed Flexible Broadband Photodetectors with Solution-Processed Transparent Polymeric Electrode 
  • Solution-based processing of the phase-change material KSb 5S8 
  • Solution-processed metal chalcogenide films for p-type transistors 
  • Special Issue on Characterization and Modeling of Polymeric Material Systems 
  • Special Issue: Physics, Mechanics and Modeling Phase Transformations 
  • Spectral response and effective viscoelastic properties of MWNT-reinforced polycarbonate 
  • Spectroscopic and Computational Investigation of Room-Temperature Decomposition of a Chemical Warfare Agent Simulant on Polycrystalline Cupric Oxide 
  • Spinodal Superlattices of Topological Insulators 
  • Stable icosahedral phase in Mg44Zn44Gd12 alloy 
  • Stalking the Materials Genome: A Data-Driven Approach to the Virtual Design of Nanostructured Polymers. 
  • Stimulus-responsive poly(N-isopropylacrylamide) brushes and nanopatterns prepared by surface-initiated polymerization 
  • Stress-induced martensitic phase transformations in polycrystalline CuZnAl shape memory alloys under different stress states 
  • Stress-induced martensitic transformations and shape memory at nanometer scales 
  • Strong, Machinable Carbon Aerogels for High Performance Supercapacitors 
  • Strong, Tailored, Biocompatible Shape-Memory Polymer Networks. 
  • Structural Tolerance Factor Approach to Defect-Resistant I2-II-IV-X4 Semiconductor Design 
  • Structural evolution during the cycling of NiTi shape memory alloys 
  • Structurally tailored organic-inorganic perovskites: Optical properties and solution-processed channel materials for thin-film transistors 
  • Structure-microstructure interactions in compression deformation of NiTi shape memory alloy micropillars 
  • Study of grain refinement and SiC nanoparticle reinforced magnesium alloys 
  • Study on preparation and characterization of regenerated cellulose/TPU composite films 
  • Study on the behaviors of multi-walled carbon nanotubes modified by gemini sulfonate dispersant and their reinforced magnesium matrix composite 
  • Success and failure in engineering 
  • Suggestions for Skillful Proposal Writing 
  • Surface segregation in nanoparticles from first principles: The case of FePt 
  • Surface-initiated atom transfer radical polymerization of oligo(ethylene glycol) methyl methacrylate from a mixed self-assembled monolayer on gold 
  • Synthesis and Characterization of Organic-Inorganic Perovskite Thin Films Prepared Using a Versatile Two-Step Dipping Technique 
  • Synthesis and Electrochemical and Photorefractive Properties of New Trinitrofluorenone−C₆₀ Photosensitizers 
  • Synthesis and characterization of Na(Gd_0.5 Lu_0.5 )F₄ : Nd³⁺ ,a core-shell free multifunctional contrast agent. 
  • Synthesis and characterization of carboxylate - FeOOH nanoparticles (ferroxanes) and ferroxane-derived ceramics 
  • Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs 
  • Synthesis of Cu-Ag, Cu-Au, and Cu-Pt Core-Shell Nanowires and Their Use in Transparent Conducting Films 
  • Synthesis of FeS@C-N hierarchical porous microspheres for the applications in lithium/sodium ion batteries 
  • Synthesis of hierarchical worm-like SnO2@C aggregates and their enhanced lithium storage properties 
  • Synthesis of high-purity few-walled carbon nanotubes from ethanol/methanol mixture 
  • Synthesis of oxidation-resistant electrochemical-active copper nanowires using phenylenediamine isomers 
  • Synthesis of rutile-phase SnxTi1-xO2 solid-solution and (SnO2)x/(TiO2)1-x core/shell nanoparticles with tunable lattice constants and controlled morphologies 
  • Synthesis of stabilized zirconia hollow nanoparticles: sugar as a template 
  • Synthesis, crystal structure, and optical and thermal properties of (C4H9NH3)(2)MI(4) (M=Ge, Sn, Pb) 
  • Systematic Band Gap Tuning of BaSnO3 via Chemical Substitutions: The Role of Clustering in Mixed-Valence Perovskites 
  • TEM studies of dislocations in deformed melt-textured YBa2Cu30x superconductors 
  • THE STRUCTURE OF SODIUM TRISILICATE GLASS VIA MOLECULAR-DYNAMICS EMPLOYING 3-BODY POTENTIALS 
  • Tensile and creep behaviors of Mg-5Zn-2.5Er alloy improved by icosahedral quasicrystal 
  • Tension-compression asymmetry of the stress-strain response in aged single crystal and polycrystalline NiTi 
  • Tetragonal phase transformation in gold nanowires 
  • The AFLOW Library of Crystallographic Prototypes: Part 1 
  • The AFLOW Library of Crystallographic Prototypes: Part 2 
  • The AFLOW standard for high-throughput materials science calculations 
  • The Role of Carbon Content: A Comparison of the Nickel Particle Size and Magnetic Property of Nickel/Polysiloxane-Derived Silicon Oxycarbide 
  • The Roles of Citrate and Defects in the Anisotropic Growth of Ag Nanostructures 
  • The debonding and fracture of Si particles during the fatigue of a cast Al-Si alloy 
  • The diffusion of antimony in heavily doped and n- and p-type silicon 
  • The effect of lattice stability determination on the computational phase diagrams of intermetallic alloys 
  • The effect of off-axis Si (100) substrates on the defect structure and electrical properties of β-SiC thin films 
  • The equilibrium and non-equilibrium thermal behaviour of aqueous ternary solutions based on complex physiological support media, containing NaCl, and dimethyl sulphoxide or glycerol 
  • The fabrication and characterization of carbon aerogels by gelation and supercritical drying in isopropanol 
  • The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part I- Aged microstructure and micro-mechanical modeling 
  • The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part II-discussion of experimental results 
  • The ordering of a Xe monolayer on quasicrystalline Al-Ni-Co 
  • The preparation of textured Te thin films with pronounced acicular morphology and concomitant high absorptivity 
  • The primary ice phase field in the H2O-NaCl-dimethyl sulphoxide ternary system 
  • The role of coherent precipitates in martensitic transformations in single crystal and polycrystalline Ti-50.8at%Ni 
  • The role of crystallinity in SWCNT-polyetherimide nanocomposites 
  • The role of vacancies and self-interstitials in impurity diffusion in silicon 
  • The search for high entropy alloys: A high-throughput ab-initio approach 
  • The variant selection criteria in single-crystal CuAlNi shape memory alloys 
  • Thermal processing of ilmenite and titania-doped haematite using microwave energy 
  • Thermal processing of polycrystalline NiTi shape memory alloys 
  • Thermally stable, highly nonlinear porphyrin-based chromophores in poled host-guest thin films 
  • Thermo-mechanical behavior of epoxy shape memory polymer foams 
  • Thermodynamic Equilibria in Carbon Nitride Photocatalyst Materials and Conditions for the Existence of Graphitic Carbon Nitride g-C3N4 
  • Thermomechanical recovery couplings of shape memory polymers in flexure 
  • Thermomechanical response of bare and Al2O3-nanocoated Au/Si bilayer beams for microelectromechanical systems 
  • Thermomechanical response of bare and Al₂ O₃ -nanocoated Au/Si bilayer beams for microelectromechanical systems 
  • Thin film deposition of organic-inorganic hybrid materials using a single source thermal ablation technique 
  • Thin-Film Deposition and Characterization of a Sn-Deficient Perovskite Derivative Cs2SnI6 
  • Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor 
  • Thin-film deposition of organic-inorganic hybrid materials 
  • Three-dimensional arrays of graphenated carbon nanotubes 
  • Topological optimization of variable area plate capacitors for coupled electromechanical energy harvesters 
  • Total external X-ray reflection: A novel method of surface chemical analysis 
  • Tough shape-memory polymer-fiber composites 
  • Toward the development of a quantitative tool for predicting dispersion of nanocomposites under non-equilibrium processing conditions 
  • Transport model for the nuclear decontamination of cementitious materials 
  • Tuning membrane content of sound absorbing cellular foams: Fabrication, experimental evidence and multiscale numerical simulations 
  • Twinning and faceting in early stages of diamond growth by chemical vapor deposition 
  • Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites 
  • Ultrabright fluorescent cellulose acetate nanoparticles for imaging tumors through systemic and topical applications 
  • Uncertainty in performance for linear and nonlinear energy harvesting strategies 
  • Understanding competing mechanisms for glass transition changes in filled elastomers 
  • Unraveling Changes to PbS Nanocrystal Surfaces Induced by Thiols 
  • Use of Drawing Lithography-Fabricated Polyglycolic Acid Microneedles for Transdermal Delivery of Itraconazole to a Human Basal Cell Carcinoma Model Regenerated on Mice. 
  • Use of Tris(trimethylsilyl)arsine to Prepare Gallium Arsenide and Indium Arsenide 
  • Use of data-driven phase space models in assessing the strength of a bolted connection in a composite beam 
  • Use of electrical resistance testing to redefine the transformation kinetics and phase diagram for shape-memory alloys 
  • Utilizing real and statistically reconstructed microstructures for the viscoelastic modeling of polymer nanocomposites 
  • Versatile Electronic Skins for Motion Detection of Joints Enabled by Aligned Few-Walled Carbon Nanotubes in Flexible Polymer Composites 
  • Vibration-based damage assessment utilizing state space geometry changes: local attractor variance ratio 
  • Vibrational entropy of the γ- Martensitic transformation in Fe 71Ni29 
  • Viscoelastic interphases in polymer–matrix composites: theoretical models and finite-element analysis 
  • Walnut-Like Multicore–Shell MnO Encapsulated Nitrogen-Rich Carbon Nanocapsules as Anode Material for Long-Cycling and Soft-Packed Lithium-Ion Batteries 
  • Weak polyelectrolyte brush arrays fabricated by combining electron-beam lithography with surface-initiated photopolymerization 
  • Wet powder metallurgy process for dispersing carbon nanotubes and fabricating magnesium composite 
  • X-RAY ANALYSIS OF INTERNAL STRAIN IN NEUTRON-IRRADIATED SILICON NITRIDES AND OXYNITRIDES. 
  • X-RAY-ANALYSIS OF INTERNAL STRAIN IN NEUTRON-IRRADIATED NITRIDES 
  • X-ray Photoelectron Spectroscopy of Iodine-Doped Nonconjugated Polymers 
  • X-ray and neutron diffraction of yttrium-barium-copper-oxide: Modeling diffraction intensity variations produced by surface leaching 
  • X-ray and neutron diffraction of yttrium-barium-copper-oxide: Modeling diffraction intensity variations produced by surface leaching 
  • Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium 
  • aflow++: A C++ framework for autonomous materials design 
  • aflow.org: A web ecosystem of databases, software and tools