Skip to main content

Three-Dimensional transonic Aeroelasticity using proper orthogonal decomposition based reduced order models

Publication ,  Conference
Thomas, JP; Dowell, EH; Hall, KC
Published in: 19th AIAA Applied Aerodynamics Conference
December 1, 2001

The proper orthogonal decomposition (POD) based reduced order modeling (ROM) technique for modeling unsteady frequency domain aerodynamics is developed for a large scale computational model of an inviscid flow transonic wing configuration. Using the methodology, it is shown that a computational fluid dynamic (CFD) model with over a three quarters of a million degrees of freedom can be reduced to a system with just a few dozen degrees of freedom, while still retaining the accuracy of the unsteady aerodynamics of the full system representation. Furthermore, POD vectors generated from unsteady flow solution snapshots based on one set of structural mode shapes can be used for different structural mode shapes so long as solution snapshots at the endpoints of the frequency range of interest are included in the overall snapshot ensemble. Thus, the snapshot computation aspect of the method, which is the most computationally expensive part of the procedure, does not have to be fully repeated as different structural configurations are considered. © 2001 by Jeffrey P. Thomas, Earl H. Dowell, and Kenneth C. Hall.

Duke Scholars

Published In

19th AIAA Applied Aerodynamics Conference

Publication Date

December 1, 2001
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Thomas, J. P., Dowell, E. H., & Hall, K. C. (2001). Three-Dimensional transonic Aeroelasticity using proper orthogonal decomposition based reduced order models. In 19th AIAA Applied Aerodynamics Conference.
Thomas, J. P., E. H. Dowell, and K. C. Hall. “Three-Dimensional transonic Aeroelasticity using proper orthogonal decomposition based reduced order models.” In 19th AIAA Applied Aerodynamics Conference, 2001.
Thomas JP, Dowell EH, Hall KC. Three-Dimensional transonic Aeroelasticity using proper orthogonal decomposition based reduced order models. In: 19th AIAA Applied Aerodynamics Conference. 2001.
Thomas, J. P., et al. “Three-Dimensional transonic Aeroelasticity using proper orthogonal decomposition based reduced order models.” 19th AIAA Applied Aerodynamics Conference, 2001.
Thomas JP, Dowell EH, Hall KC. Three-Dimensional transonic Aeroelasticity using proper orthogonal decomposition based reduced order models. 19th AIAA Applied Aerodynamics Conference. 2001.

Published In

19th AIAA Applied Aerodynamics Conference

Publication Date

December 1, 2001