Skip to main content
Journal cover image

Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds

Publication ,  Journal Article
Walker, JM; Bodamer, E; Kleinfehn, A; Luo, Y; Becker, M; Dean, D
Published in: Progress in Additive Manufacturing
June 1, 2017

The primary goal of tissue engineering is to repair a defect by encouraging new tissue growth and remodeling of that tissue within a biodegradable scaffold. The scaffold is the centerpiece of tissue engineering efforts, and its design and properties are of paramount importance. The architecture of the scaffold will directly impact its mechanical strength, degradation characteristics, and capacity to guide neotissues into the defect. Scaffold porosity is frequently used as a solitary description of architecture, while feature dimensions such as strut size and pore size are largely ignored. It is well known that pore size and shape influence tissue regeneration while strut size (i.e., wall thickness) dramatically affect mechanical strength and resorption kinetics. In this work, we propose a methodology that places special emphasis on feature dimensions using a mathematical approximation of Schoen’s gyroid, a triply periodic minimal surface, as the foundation for pore architecture. By modulating the gyroid and making virtual measurements of the resulting structures, we establish important relationships between feature dimensions and the governing equation. Using this foundation, scaffolds with gyroid-type porosity were designed and 3D printed out of a bioresorbable poly(propylene fumarate)-based resin. Unconfined compression testing was conducted on fully dense parts, as well parts with designed porosity, to establish a baseline for mechanical properties. Orientation-based mechanical anisotropy was seen in these 3D printed porous specimens. Finally, we demonstrate how such architectures can be embedded into anatomical shapes.

Duke Scholars

Altmetric Attention Stats
Dimensions Citation Stats

Published In

Progress in Additive Manufacturing

DOI

EISSN

2363-9520

ISSN

2363-9512

Publication Date

June 1, 2017

Volume

2

Issue

1-2

Start / End Page

99 / 108
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Walker, J. M., Bodamer, E., Kleinfehn, A., Luo, Y., Becker, M., & Dean, D. (2017). Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds. Progress in Additive Manufacturing, 2(1–2), 99–108. https://doi.org/10.1007/s40964-017-0021-3
Walker, J. M., E. Bodamer, A. Kleinfehn, Y. Luo, M. Becker, and D. Dean. “Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds.” Progress in Additive Manufacturing 2, no. 1–2 (June 1, 2017): 99–108. https://doi.org/10.1007/s40964-017-0021-3.
Walker JM, Bodamer E, Kleinfehn A, Luo Y, Becker M, Dean D. Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds. Progress in Additive Manufacturing. 2017 Jun 1;2(1–2):99–108.
Walker, J. M., et al. “Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds.” Progress in Additive Manufacturing, vol. 2, no. 1–2, June 2017, pp. 99–108. Scopus, doi:10.1007/s40964-017-0021-3.
Walker JM, Bodamer E, Kleinfehn A, Luo Y, Becker M, Dean D. Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds. Progress in Additive Manufacturing. 2017 Jun 1;2(1–2):99–108.
Journal cover image

Published In

Progress in Additive Manufacturing

DOI

EISSN

2363-9520

ISSN

2363-9512

Publication Date

June 1, 2017

Volume

2

Issue

1-2

Start / End Page

99 / 108