Skip to main content

Ultrasonic imaging using a 5-MHz multilayer/single-layer hybrid array for increased signal-to-noise ratio.

Publication ,  Journal Article
Emery, CD; Smith, SW
Published in: IEEE transactions on ultrasonics, ferroelectrics, and frequency control
January 1999

Conventional diagnostic ultrasound scanners are bulky and require significant amounts of electrical power during operation. Reducing the size, weight, and consumption of electrical power is made easier through the use of highly integrated compact transmit and receive electronics that may be incorporated in the transducer handle. This necessitates the use of low voltage transmitters and low power receive preamplifiers. Conventional scanners typically use approximately 100-V pulses during transmit; therefore, decreasing the transmit voltage to 15 V decreases the transmit sensitivity. Conventional receive electronics that are located at the scanner degrade the received signal-to-noise ratio (SNR) because the array element cannot efficiently drive the coaxial cable. Transmit sensitivity and received SNR can be radically improved using a multilayer/single-layer hybrid array making integration of electronics into the transducer handle more feasible. In this paper, we discuss the design, fabrication, and testing of a 5-MHz hybrid linear array. The hybrid array included 16 multilayer transmit elements (10 Omega impedance) and 24 single-layer receive elements at a half wavelength element pitch. Low voltage transmitters with an output resistance of 7 Omega and high impedance JFET preamplifiers using 15 V for biasing were located adjacent to the hybrid array in the transducer handle. The transmit sensitivity and received SNR of the hybrid array were compared with a conventional array using 50-Omega transmitters and receive preamplifiers at the scanner. The transmit sensitivity improved by 12.8 dB, and the received SNR improved by 7.8 dB, yielding an overall improvement of 20.6 dB, which compared well with predictions from the KLM model. Images of phantoms and in vivo images of the kidney obtained with the Siemens Model 1200 phased array system showed the increased SNR using the hybrid array. Estimates of penetration in tissue mimicking phantoms (alpha=0.5 dB/(cm MHz)) improved by 7 cm compared with the control.

Duke Scholars

Altmetric Attention Stats
Dimensions Citation Stats

Published In

IEEE transactions on ultrasonics, ferroelectrics, and frequency control

DOI

EISSN

1525-8955

ISSN

0885-3010

Publication Date

January 1999

Volume

46

Issue

5

Start / End Page

1101 / 1119

Related Subject Headings

  • Acoustics
  • 51 Physical sciences
  • 40 Engineering
  • 09 Engineering
  • 02 Physical Sciences
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Emery, C. D., & Smith, S. W. (1999). Ultrasonic imaging using a 5-MHz multilayer/single-layer hybrid array for increased signal-to-noise ratio. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 46(5), 1101–1119. https://doi.org/10.1109/58.796116
Emery, C. D., and S. W. Smith. “Ultrasonic imaging using a 5-MHz multilayer/single-layer hybrid array for increased signal-to-noise ratio.IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 46, no. 5 (January 1999): 1101–19. https://doi.org/10.1109/58.796116.
Emery CD, Smith SW. Ultrasonic imaging using a 5-MHz multilayer/single-layer hybrid array for increased signal-to-noise ratio. IEEE transactions on ultrasonics, ferroelectrics, and frequency control. 1999 Jan;46(5):1101–19.
Emery, C. D., and S. W. Smith. “Ultrasonic imaging using a 5-MHz multilayer/single-layer hybrid array for increased signal-to-noise ratio.IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 46, no. 5, Jan. 1999, pp. 1101–19. Epmc, doi:10.1109/58.796116.
Emery CD, Smith SW. Ultrasonic imaging using a 5-MHz multilayer/single-layer hybrid array for increased signal-to-noise ratio. IEEE transactions on ultrasonics, ferroelectrics, and frequency control. 1999 Jan;46(5):1101–1119.

Published In

IEEE transactions on ultrasonics, ferroelectrics, and frequency control

DOI

EISSN

1525-8955

ISSN

0885-3010

Publication Date

January 1999

Volume

46

Issue

5

Start / End Page

1101 / 1119

Related Subject Headings

  • Acoustics
  • 51 Physical sciences
  • 40 Engineering
  • 09 Engineering
  • 02 Physical Sciences