Versatile Manufacturing of Split-Block Microwave Devices Using Rapid Prototyping and Electroplating
Publication
, Journal Article
Zhu, R; Lipworth, G; Zvolensky, T; Smith, DR; Marks, DL
Published in: IEEE Antennas and Wireless Propagation Letters
January 1, 2017
We present a novel method of rapid prototyping waveguide and antenna using plating on plastic technique. The part is created by high-precision three-dimensional printing and plated with copper using both electroless plating and electroplating. The performance is comparable to industry-made waveguides and antennas, but the time and cost for creating these parts are largely reduced.
Duke Scholars
Altmetric Attention Stats
Dimensions Citation Stats
Published In
IEEE Antennas and Wireless Propagation Letters
DOI
ISSN
1536-1225
Publication Date
January 1, 2017
Volume
16
Start / End Page
157 / 160
Related Subject Headings
- Networking & Telecommunications
- 4006 Communications engineering
- 1005 Communications Technologies
- 0906 Electrical and Electronic Engineering
Citation
APA
Chicago
ICMJE
MLA
NLM
Zhu, R., Lipworth, G., Zvolensky, T., Smith, D. R., & Marks, D. L. (2017). Versatile Manufacturing of Split-Block Microwave Devices Using Rapid Prototyping and Electroplating. IEEE Antennas and Wireless Propagation Letters, 16, 157–160. https://doi.org/10.1109/LAWP.2016.2563398
Zhu, R., G. Lipworth, T. Zvolensky, D. R. Smith, and D. L. Marks. “Versatile Manufacturing of Split-Block Microwave Devices Using Rapid Prototyping and Electroplating.” IEEE Antennas and Wireless Propagation Letters 16 (January 1, 2017): 157–60. https://doi.org/10.1109/LAWP.2016.2563398.
Zhu R, Lipworth G, Zvolensky T, Smith DR, Marks DL. Versatile Manufacturing of Split-Block Microwave Devices Using Rapid Prototyping and Electroplating. IEEE Antennas and Wireless Propagation Letters. 2017 Jan 1;16:157–60.
Zhu, R., et al. “Versatile Manufacturing of Split-Block Microwave Devices Using Rapid Prototyping and Electroplating.” IEEE Antennas and Wireless Propagation Letters, vol. 16, Jan. 2017, pp. 157–60. Scopus, doi:10.1109/LAWP.2016.2563398.
Zhu R, Lipworth G, Zvolensky T, Smith DR, Marks DL. Versatile Manufacturing of Split-Block Microwave Devices Using Rapid Prototyping and Electroplating. IEEE Antennas and Wireless Propagation Letters. 2017 Jan 1;16:157–160.
Published In
IEEE Antennas and Wireless Propagation Letters
DOI
ISSN
1536-1225
Publication Date
January 1, 2017
Volume
16
Start / End Page
157 / 160
Related Subject Headings
- Networking & Telecommunications
- 4006 Communications engineering
- 1005 Communications Technologies
- 0906 Electrical and Electronic Engineering