Skip to main content

Linear and nonlinear aeroelastic analysis of a high aspect ratio wing

Publication ,  Conference
Bakhtiari-Nejad, F; Modarres, AH; Dowell, EH; Shahverdi, H
Published in: Proceedings of the ASME Design Engineering Technical Conference
January 1, 2017

In this study, analysis and results of linear and nonlinear aeroelastic of a cantilever beam subjected to the airflow as a model of a high aspect ratio wing are presented. A third-order nonlinear beam model is used as structural model to take into account the effects of geometric structural nonlinearities. In order to model aerodynamic loads, Wagner state-space model has been used. Galerkin method is implemented to solve dynamic perturbation equations about a nonlinear static equilibrium state. The small perturbation flutter boundary is determined by these perturbation equations. The effect of geometric structural nonlinearity of the beam model on the flutter behavior is significant. As it is observed the system's response to upper speed of flutter goes to limit cycle oscillations and also the oscillations lose periodicity and become chaotic

Duke Scholars

Published In

Proceedings of the ASME Design Engineering Technical Conference

DOI

Publication Date

January 1, 2017

Volume

8
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Bakhtiari-Nejad, F., Modarres, A. H., Dowell, E. H., & Shahverdi, H. (2017). Linear and nonlinear aeroelastic analysis of a high aspect ratio wing. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 8). https://doi.org/10.1115/DETC2017-67289
Bakhtiari-Nejad, F., A. H. Modarres, E. H. Dowell, and H. Shahverdi. “Linear and nonlinear aeroelastic analysis of a high aspect ratio wing.” In Proceedings of the ASME Design Engineering Technical Conference, Vol. 8, 2017. https://doi.org/10.1115/DETC2017-67289.
Bakhtiari-Nejad F, Modarres AH, Dowell EH, Shahverdi H. Linear and nonlinear aeroelastic analysis of a high aspect ratio wing. In: Proceedings of the ASME Design Engineering Technical Conference. 2017.
Bakhtiari-Nejad, F., et al. “Linear and nonlinear aeroelastic analysis of a high aspect ratio wing.” Proceedings of the ASME Design Engineering Technical Conference, vol. 8, 2017. Scopus, doi:10.1115/DETC2017-67289.
Bakhtiari-Nejad F, Modarres AH, Dowell EH, Shahverdi H. Linear and nonlinear aeroelastic analysis of a high aspect ratio wing. Proceedings of the ASME Design Engineering Technical Conference. 2017.

Published In

Proceedings of the ASME Design Engineering Technical Conference

DOI

Publication Date

January 1, 2017

Volume

8