Skip to main content

Mechanical design of the NSTX high-k scattering diagnostic

Publication ,  Conference
Feder, R; Mazzucato, E; Munsat, T; Park, H; Smith, DR; Ellis, R; Labik, G; Priniski, C
Published in: Proceedings Symposium on Fusion Engineering
January 1, 2005

The NSTX High-k Scattering Diagnostic measures small-scale density fluctuations by the heterodyne detection of waves scattered from a millimeter wave probe beam at 280 GHz and λ=1. 07 mm. To enable this measurement, major alterations were made to the NSTX vacuum vessel and Neutral Beam armor. Close collaboration between the PPPL physics and engineering staff resulted in a flexible system with steerable launch and detection optics that can position the scattering volume either near the magnetic axis (p ≈ . T) or near the edge (p ≈ . 8). ISO feet of carefully aligned corrugated waveguide was installed for injection of the probe beam and collection of the scattered signal in to the detection electronics. © IEEE.

Duke Scholars

Published In

Proceedings Symposium on Fusion Engineering

DOI

Publication Date

January 1, 2005
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Feder, R., Mazzucato, E., Munsat, T., Park, H., Smith, D. R., Ellis, R., … Priniski, C. (2005). Mechanical design of the NSTX high-k scattering diagnostic. In Proceedings Symposium on Fusion Engineering. https://doi.org/10.1109/FUSION.2005.252971
Feder, R., E. Mazzucato, T. Munsat, H. Park, D. R. Smith, R. Ellis, G. Labik, and C. Priniski. “Mechanical design of the NSTX high-k scattering diagnostic.” In Proceedings Symposium on Fusion Engineering, 2005. https://doi.org/10.1109/FUSION.2005.252971.
Feder R, Mazzucato E, Munsat T, Park H, Smith DR, Ellis R, et al. Mechanical design of the NSTX high-k scattering diagnostic. In: Proceedings Symposium on Fusion Engineering. 2005.
Feder, R., et al. “Mechanical design of the NSTX high-k scattering diagnostic.” Proceedings Symposium on Fusion Engineering, 2005. Scopus, doi:10.1109/FUSION.2005.252971.
Feder R, Mazzucato E, Munsat T, Park H, Smith DR, Ellis R, Labik G, Priniski C. Mechanical design of the NSTX high-k scattering diagnostic. Proceedings Symposium on Fusion Engineering. 2005.

Published In

Proceedings Symposium on Fusion Engineering

DOI

Publication Date

January 1, 2005