Skip to main content

Human Cervical Motion Segment Flexibility and Facet Capsular Ligament Strain under Combined Posterior Shear, Extension and Axial Compression

Publication ,  Conference
Siegmund, G; Myers, BS
Published in: SAE Technical Papers
November 1, 2000

The cervical facet capsular ligaments are thought to be an important anatomical site of whiplash injury, although the mechanism by which these structures may be injured during whiplash remains unclear. The purpose of this study was to quantify the intervertebral flexibility and maximum principal strain in the facet capsular ligament under combined shear, bending and compressive loads similar to those which occur during whiplash loading. Two motion segments (C3-4 and C5-6) from seven female donors (50 ± P 10 years) were exposed to quasi-static posterior shear loads of 135 N applied to the superior vertebra on four occasions while under compressive axial preloads of 0 N, 45 N, 197 N and 325 N. Vertebral body motions and the full Lagrangian strain field in the right facet capsular ligament were measured using stereophotogrammetry. After flexibility testing, the right facet joint of each motion segment was isolated and failed in posterior shear. Differences in the kinematic response of the vertebrae and maximum principal strain in the capsular ligaments under the four axial preloads were tested using repeated-measures ANOVA''s for each load step. Although significant differences were observed at two axial load levels in the kinematic sequence (197 N and 325 N), neither the regressed flexibility nor the maximum principal strain in the facet capsular ligament varied significantly with axial compression (p >0.14). Maximum principal strain during the flexibility tests reached 61 ± 33 percent of the maximum principal strain observed in sub-catastrophic failures of the isolated joints. Two of the thirteen specimens reached strains in their flexibility tests which were larger than their corresponding strains at sub-catastrophic failure in the failure tests. These results suggest that the cervical facet capsular ligaments may be injured under combined shear, bending and compression load levels that occur in rear-end impacts.

Duke Scholars

Published In

SAE Technical Papers

DOI

EISSN

0148-7191

Publication Date

November 1, 2000

Volume

2000-November

Issue

November

Related Subject Headings

  • 0910 Manufacturing Engineering
  • 0902 Automotive Engineering
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Siegmund, G., & Myers, B. S. (2000). Human Cervical Motion Segment Flexibility and Facet Capsular Ligament Strain under Combined Posterior Shear, Extension and Axial Compression. In SAE Technical Papers (Vol. 2000-November). https://doi.org/10.4271/2000-01-SC12
Siegmund, G., and B. S. Myers. “Human Cervical Motion Segment Flexibility and Facet Capsular Ligament Strain under Combined Posterior Shear, Extension and Axial Compression.” In SAE Technical Papers, Vol. 2000-November, 2000. https://doi.org/10.4271/2000-01-SC12.
Siegmund, G., and B. S. Myers. “Human Cervical Motion Segment Flexibility and Facet Capsular Ligament Strain under Combined Posterior Shear, Extension and Axial Compression.” SAE Technical Papers, vol. 2000-November, no. November, 2000. Scopus, doi:10.4271/2000-01-SC12.

Published In

SAE Technical Papers

DOI

EISSN

0148-7191

Publication Date

November 1, 2000

Volume

2000-November

Issue

November

Related Subject Headings

  • 0910 Manufacturing Engineering
  • 0902 Automotive Engineering