Skip to main content

Using Wavelet Analysis to Distinguish Cavitation Acoustic Emissions From Blunt Impact Noise.

Publication ,  Journal Article
Eckersley, C; Op 't Eynde, J; Abrams, M; Bass, CR
Published in: Journal of biomechanical engineering
July 2021

Cavitation has been shown to have implications for head injury, but currently there is no solution for detecting the formation of cavitation through the skull during blunt impact. The goal of this communication is to confirm the wideband acoustic wavelet signature of cavitation collapse, and determine that this signature can be differentiated from the noise of a blunt impact. A controlled, laser induced cavitation study was conducted in an isolated water tank to confirm the wide band acoustic signature of cavitation collapse in the absence of a blunt impact. A clear acrylic surrogate head was impacted to induce blunt impact cavitation. The bubble formation was imaged using a high speed camera, and the collapse was synched up with the wavelet transform of the acoustic emission. Wideband acoustic response is seen in wavelet transform of positive laser induced cavitation tests, but absent in laser induced negative controls. Clear acrylic surrogate tests showed the wideband acoustic wavelet signature of collapse can be differentiated from acoustic noise generated by a blunt impact. Broadband acoustic signal can be used as a biomarker to detect the incidence of cavitation through the skull as it consists of frequencies that are low enough to potentially pass through the skull but high enough to differentiate from blunt impact noise. This lays the foundation for a vital tool to conduct CSF cavitation research in-vivo.

Duke Scholars

Published In

Journal of biomechanical engineering

DOI

EISSN

1528-8951

ISSN

0148-0731

Publication Date

July 2021

Related Subject Headings

  • Biomedical Engineering
  • 4003 Biomedical engineering
  • 0913 Mechanical Engineering
  • 0903 Biomedical Engineering
 

Citation

APA
Chicago
ICMJE
MLA
NLM
Eckersley, C., Op ’t Eynde, J., Abrams, M., & Bass, C. R. (2021). Using Wavelet Analysis to Distinguish Cavitation Acoustic Emissions From Blunt Impact Noise. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4051660
Eckersley, Christopher, Joost Op ’t Eynde, Mitchell Abrams, and Cameron R. Bass. “Using Wavelet Analysis to Distinguish Cavitation Acoustic Emissions From Blunt Impact Noise.Journal of Biomechanical Engineering, July 2021. https://doi.org/10.1115/1.4051660.
Eckersley C, Op ’t Eynde J, Abrams M, Bass CR. Using Wavelet Analysis to Distinguish Cavitation Acoustic Emissions From Blunt Impact Noise. Journal of biomechanical engineering. 2021 Jul;
Eckersley, Christopher, et al. “Using Wavelet Analysis to Distinguish Cavitation Acoustic Emissions From Blunt Impact Noise.Journal of Biomechanical Engineering, July 2021. Epmc, doi:10.1115/1.4051660.
Eckersley C, Op ’t Eynde J, Abrams M, Bass CR. Using Wavelet Analysis to Distinguish Cavitation Acoustic Emissions From Blunt Impact Noise. Journal of biomechanical engineering. 2021 Jul;

Published In

Journal of biomechanical engineering

DOI

EISSN

1528-8951

ISSN

0148-0731

Publication Date

July 2021

Related Subject Headings

  • Biomedical Engineering
  • 4003 Biomedical engineering
  • 0913 Mechanical Engineering
  • 0903 Biomedical Engineering