The influence of anisotropy on compaction bands: The case of coaxiality between stress and fabric anisotropy tensors

Compaction bands are localized failure patterns that appear in highly porous rock material under the effect of relatively high confining pressure. Being affected mainly by volumetric compression, these bands appear to be almost perpendicular to the most compressive principal stress of a stress state at the so-called “cap” of the yield surface (YS). In this study, we focus on the mechanism that leads to the onset of compaction bands by using a viscoplasticity model able to describe the post-localization response of these materials. The proposed constitutive framework is based on the overstress theory of Perzyna (1966) and the anisotropic clay plasticity model of Dafalias (1986), which provides not only the necessary “cap” of the YS, but introduces a rotational hardening (RH) mechanism, thus, accounting for the effect of fabric anisotropy. Following the analysis of Veveakis and Regenauer-Lieb (2015), we identify the compaction bands as “static” cnoidal wave formations in the medium that occur at a post-yield regime, and we study the effect of rotational and isotropic hardening on their onset. Moreover, we determine a theoretical range of confining pressures in triaxial compression tests for the compaction bands to develop. Under the assumption of coaxiality between stress and anisotropy tensors, the results show that the isotropic hardening promotes compaction localization, whereas the RH has a slightly negative effect on the onset of compaction localization.

Duke Scholars

Author Manolis Veveakis Civil and Environmental Engineering