Effect of Gd on microstructure and corrosion behavior of Mg-xGd-1Er-1Zn-0.6Zr alloys

The Mg-xGd-1Er-1Zn-0.6Zr alloys with Gd contents of 7%(mass fraction), 9% and 11% were prepared by gravity casting method.The microstructure of the alloys was studied by means of optical microscope, scanning electron microscope and X-ray diffractometer.The corrosion behavior of the alloys were evaluated by means of open circuit potential, potentiodynamic polarization and electrochemical impedance spectroscopy measurements in 3.5%NaCl solution.The results show that when Gd content increases from 7% to 11%, the peak time of open circuit potential decreases from 1609 s to 851 s, the charge transfer resistance decreases from 588.50 Ω to 31.9 Ω, the corrosion current density increases from 2.21×10^-5 A/cm² to 3.97×10^-5 A/cm², indicating that the corrosion resistance of the alloys decreases with the increase of Gd content.It is attributed to the combined operation of the micro-galvanic corrosion effect as well as corrosion barrier effect of second phase.When the Gd content increases from 7% to 11%, the volume fraction of (Mg, Zn)3(Gd, Er) phase increases from 1.9% to 5.2%, and changes from discontinuous distribution to semi-continuous distribution along grain boundaries, the volume fraction of the lamellar-shape LPSO phase increases from 11.7% to 26.7% and penetrates into grains.The increase in the volume fraction of the (Mg, Zn)3(Gd, Er) phase and the lamellar-shape LPSO phase results in the decrease of corrosion resistance, however, a large number of fine lamellar-shape LPSO phases is able to prevent the corrosion from spreading and slow down the growth of corrosion rate of the alloy with 11%Gd content in 8-24 h.

Duke Scholars

Author Zhaohui Wang Pathology