Machining accuracy due to tool or workpiece vibrations
Publication
, Journal Article
Mann, BP; Bartow, MJ; Young, KA; Bayly, PV; Schmitz, TL
Published in: American Society of Mechanical Engineers, Manufacturing Engineering Division, MED
January 1, 2003
This paper presents a newly developed method for predicting dimensional errors caused by vibrations of either the cutting tool or workpiece. In previous literature, this phenomenon has been described as the "surface location error" from process dynamics. Analytical predictions are compared to several milling experiments: 1) a flexible workpiece and rigid tool; and 2) a rigid workpiece and flexible tool. Tool or workpiece vibrations were measured with non-contact sensors during the cutting process. In addition, dimensional errors were directly measured on machined pans. The results from experimental cutting tests show good agreement with theoretical predictions.
Duke Scholars
Published In
American Society of Mechanical Engineers, Manufacturing Engineering Division, MED
DOI
Publication Date
January 1, 2003
Volume
14
Start / End Page
55 / 62
Related Subject Headings
- Industrial Engineering & Automation
Citation
APA
Chicago
ICMJE
MLA
NLM
Mann, B. P., Bartow, M. J., Young, K. A., Bayly, P. V., & Schmitz, T. L. (2003). Machining accuracy due to tool or workpiece vibrations. American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 14, 55–62. https://doi.org/10.1115/IMECE2003-41991
Mann, B. P., M. J. Bartow, K. A. Young, P. V. Bayly, and T. L. Schmitz. “Machining accuracy due to tool or workpiece vibrations.” American Society of Mechanical Engineers, Manufacturing Engineering Division, MED 14 (January 1, 2003): 55–62. https://doi.org/10.1115/IMECE2003-41991.
Mann BP, Bartow MJ, Young KA, Bayly PV, Schmitz TL. Machining accuracy due to tool or workpiece vibrations. American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. 2003 Jan 1;14:55–62.
Mann, B. P., et al. “Machining accuracy due to tool or workpiece vibrations.” American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, vol. 14, Jan. 2003, pp. 55–62. Scopus, doi:10.1115/IMECE2003-41991.
Mann BP, Bartow MJ, Young KA, Bayly PV, Schmitz TL. Machining accuracy due to tool or workpiece vibrations. American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. 2003 Jan 1;14:55–62.
Published In
American Society of Mechanical Engineers, Manufacturing Engineering Division, MED
DOI
Publication Date
January 1, 2003
Volume
14
Start / End Page
55 / 62
Related Subject Headings
- Industrial Engineering & Automation