Identification of machine tool chatter for milling operations with runout
Publication
, Journal Article
Insperger, T; Mann, BP; Surmann, T; Stepan, G
Published in: 14th International Congress on Sound and Vibration 2007, ICSV 2007
December 1, 2007
Detection of undesired machine tool vibrations during milling operations is an important task for manufacturing engineers. Monitoring of frequency spectra is an efficient tool of chatter detection since these spectra usually have a clear, systematic structure. However, for some special cases, stability of the cutting process cannot be assessed based purely on the frequency spectra due to the disturbing effect of the runout of the tool. In this paper, it is shown that the stability of these cases can be assessed by the analysis of the vibration signal instead of the frequency spectra. Theoretical results are confirmed by experimental cutting tests.
Duke Scholars
Published In
14th International Congress on Sound and Vibration 2007, ICSV 2007
Publication Date
December 1, 2007
Volume
2
Start / End Page
1426 / 1433
Citation
APA
Chicago
ICMJE
MLA
NLM
Insperger, T., Mann, B. P., Surmann, T., & Stepan, G. (2007). Identification of machine tool chatter for milling operations with runout. 14th International Congress on Sound and Vibration 2007, ICSV 2007, 2, 1426–1433.
Insperger, T., B. P. Mann, T. Surmann, and G. Stepan. “Identification of machine tool chatter for milling operations with runout.” 14th International Congress on Sound and Vibration 2007, ICSV 2007 2 (December 1, 2007): 1426–33.
Insperger T, Mann BP, Surmann T, Stepan G. Identification of machine tool chatter for milling operations with runout. 14th International Congress on Sound and Vibration 2007, ICSV 2007. 2007 Dec 1;2:1426–33.
Insperger, T., et al. “Identification of machine tool chatter for milling operations with runout.” 14th International Congress on Sound and Vibration 2007, ICSV 2007, vol. 2, Dec. 2007, pp. 1426–33.
Insperger T, Mann BP, Surmann T, Stepan G. Identification of machine tool chatter for milling operations with runout. 14th International Congress on Sound and Vibration 2007, ICSV 2007. 2007 Dec 1;2:1426–1433.
Published In
14th International Congress on Sound and Vibration 2007, ICSV 2007
Publication Date
December 1, 2007
Volume
2
Start / End Page
1426 / 1433